« previous next »
Pages: [1]   Go Down

Author Topic: Remington 7mm-08 case dimension  (Read 1033 times)

0 Members and 2 Guests are viewing this topic.

Offline LouisV

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Remington 7mm-08 case dimension
« on: November 28, 2004, 06:34:29 AM »
If someone here has some remington brass in 7mm-08, could they measure the head dia. and post it here for me? I'm thinking of switching from winchester to remington cases for this caliber. The win. brass I have measures .465" at the base and all of the case drawings I find have found have that point at .470". I have both remingtom and winchester to compare in another caliber and the remington comes closer to spec for it. So I am hopeing to find a closer fit with the remington in 7mm-08. LouisV
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
Remington 7mm-08 case dimension
« Reply #1 on: November 28, 2004, 07:03:07 AM »
Logged

Offline LouisV

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
7-08 brass
« Reply #2 on: December 06, 2004, 05:11:34 AM »
Let me rephrase me question on this old post. Does ANY company make cases for 7mm-08 rem. that measures .470 or at least close at the base? LouisV
Logged

Offline Wlscott

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 987
Remington 7mm-08 case dimension
« Reply #3 on: December 06, 2004, 10:30:32 AM »
Louis, I've got some Remington 7MM-08 cases at home.  I'll mic the heads when I get home tonight for you.
Logged
You haven't hunted......Until you've hunted the hunters

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26945
  • Gender: Male
Remington 7mm-08 case dimension
« Reply #4 on: December 06, 2004, 11:07:17 AM »
Mine measure:

RP .469"

Frontier .467"
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline LouisV

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
rem 7mm08 case
« Reply #5 on: December 06, 2004, 11:41:31 AM »
Graybeard, Thank you for your help. LouisV
Logged

Offline Wlscott

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 987
Remington 7mm-08 case dimension
« Reply #6 on: December 06, 2004, 03:27:22 PM »
My virgin Remington FL sized brass measures .465 and unfired Frontier brass measures .464".
Logged
You haven't hunted......Until you've hunted the hunters

Offline LouisV

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
7mm-08 case
« Reply #7 on: December 07, 2004, 12:39:13 PM »
Thanks Wlscott. I bought some Rem brass today and mine measures .466". It must vary some by lot date I guess. At least I'm .001" closer to a good fit. I just don't get it. It's bad enough that we have to put up with undersized cases in calibers like the 6.5x55. But this is an american cartridge, one would think that we could make brass to our own specs. I'm sure they have good reasons for makeing it undersized but accuracy isn't one of them. I'm hopeing that someday Lapua or one of the other makers of good brass will carry this cartridge. I'll get off my soapbox now. Thanks again for your help. LouisV
Logged

Offline Leftoverdj

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1398
Remington 7mm-08 case dimension
« Reply #8 on: December 07, 2004, 01:06:18 PM »
Louis, bothers you that bad, reform from 6.5x 55.  American made brass may be undersized for that cartridge, but it's sure closer to what you want than what you have.
Logged
It is the duty of the good citizen to love his country and hate his gubmint.

Offline LouisV

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
reforming form 6.5x55
« Reply #9 on: December 08, 2004, 12:36:29 PM »
Leftoverdj, I going to try that. I just ran a 6.5 x55 case thru my 7mm-08 die, with a couple of aneallings and lots of trimming it seemed to come out in pretty good shape. I'm going to do some checking around and learn more about this reforming process before I load any. Thanks, LouisV
Logged
Pages: [1]   Go Up
« previous next »