Author Topic: Schematics....  (Read 922 times)

0 Members and 2 Guests are viewing this topic.

TM7

  • Guest
Schematics....
« on: December 07, 2004, 10:15:17 AM »
I've checked Brownell's and Numrich for schematic blowups for the SB2.
But had no luck.....does anyone have a link for the SB2 schematic?


Thanx all.................TM7

Offline JPH45

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1145
Schematics....
« Reply #1 on: December 07, 2004, 11:51:10 AM »
Not sure this will help, have you looked for H&R Topper, or H&R Model 158, or for the Pardner shotguns? The Topper and 158 may or may not show the transfer bar system, depends on the age of the drawings.
Boycott Natchez Shooters Supplies, Inc

Offline naedlaen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 53
Schematics....
« Reply #2 on: December 07, 2004, 11:51:21 AM »
Don't have a total schematics link, but for the trigger/transfer/hammer perklo has a lot of photos and the hammer/trigger reassembled in a downloadable pdf at www.perkloafm.com

Hope this helps.

Neal

Offline jbtazgrabber

  • Trade Count: (20)
  • A Real Regular
  • ****
  • Posts: 749
NN
« Reply #3 on: December 07, 2004, 01:32:52 PM »
IF YOU DONT HAVE THE SLAVE PIN TO PUT BACK TOGETHER I USE A 17 CAJ...BULLET

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Schematics....
« Reply #4 on: December 07, 2004, 08:03:38 PM »
4 round tooth pick cut off works just fine too. 8)
Badnews Bob
AE-2 USN retired

Offline lik2hunt

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1629
  • Gender: Male
  • I want to acheive excellence, not perfection.
    • Authentic and Genuine
Schematics....
« Reply #5 on: December 07, 2004, 09:15:01 PM »
lik2hunt------>in OK





“The thing that separates the American Christian from every other person on earth is the fact that he would rather die on his feet, than live on his knees!"
George Washington…. also known as the Father of our Country

><> Galatians 2:20 <><

www.dsheriff.org

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Schematics....
« Reply #6 on: December 08, 2004, 10:11:53 AM »
The Raynor trigger hone may be of help too, if you haven't seen it.

http://www.graybeardoutdoors.com/phpbb2/viewtopic.php?t=26200
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Schematics....
« Reply #7 on: December 09, 2004, 09:52:20 AM »
I think Fred M had some info on that on his web page...

http://www.angelfire.com/ma/ZERMEL/tweakultra.html
"Always do right, this will gratify some and astonish the rest" -  Mark Twain