« previous next »
Pages: [1]   Go Down

Author Topic: Light loads for 45/70  (Read 649 times)

0 Members and 1 Guest are viewing this topic.

Offline Prince of Wales

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 376
Light loads for 45/70
« on: December 07, 2004, 10:25:48 AM »
My son in law has a Marlin Guide Gun in 45/70 that he wants to use as a heavy cover Blacktail rifle. Naturally he is not looking for the most powerful loads but not really what would be considered a reduced load either. Anyone have a load that would fit that purpose. Thanks. POW
Logged

Offline Reloader

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 155
45-70
« Reply #1 on: December 07, 2004, 02:28:53 PM »
I loaded up some 300 grain Sierra HPFN bullets in front of IMR 4198.
42.1 grains felt pretty potent in my Thompson Contender so I dropped back to 39.9 grains and they grouped decently. I haven't put any across the chronograph.  I would be interested in hearing from anyone who has used this bullet on deer as that is my intention for this load. :)
Logged
If I can make it go bang it can't be that hard to do.

Offline jackfish

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 215
Light loads for 45/70
« Reply #2 on: December 08, 2004, 04:34:01 AM »
Marlin 1895 45-70
300 grain Hornady hollow point seated to 2.55" and crimped with a Lee Factory Crimp Die
Winchester brass, 2.1" trim
CCI 200 primers
50 grains H4198 START
55 grains H4198 HUNTING LOAD
Adapted from Hodgdon #27

The HUNTING LOAD achieves 2180 fps from my 22" barrel so it should produce about 2100 fps in the 1895G.  Its accurate in my rifle and makes a great deer load.

Reloader, I have killed a half dozen deer with the 300 grain Sierra hollow point.  Caliber-sized hole in, up to two-inch hole out.  None went more than 10 yards.  Your load out of the Contender is pretty mild, but should be effective.
Logged
You learn something new everyday whether you want to or not.

Offline Deadeye47

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1124
Light loads for 45/70
« Reply #3 on: December 08, 2004, 12:37:27 PM »
favorite 'LITE" load is 13.5 grains Unique with either 300 grain Cast W/GC or a 405 grain Cast W/GC....accurate,ecconomical and can shoot them all day long.... :wink:
Logged
" I believe that forgiving them [terrorists] is God''s function. OUR JOB is to arrange the meeting." Gen. Schwartzkopf........AMEN  Norman  :agree:

DECEASED 10-09-05

Offline Leftoverdj

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1398
Light loads for 45/70
« Reply #4 on: December 09, 2004, 06:18:43 AM »
Deadeye, I use 12.5 grains Unique and plain base or hollow base bullets. Accuracy could not be better and using PB is a considerable savings.
Logged
It is the duty of the good citizen to love his country and hate his gubmint.

Offline Prince of Wales

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 376
Light loads for 45/70
« Reply #5 on: December 09, 2004, 09:58:46 AM »
Leftoverdj what weight bullet do you use 12.5 gr of unique with? Thanks. POW
Logged

Offline raynor

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 199
Light loads for 45/70
« Reply #6 on: December 11, 2004, 02:49:34 PM »
Here's a few cast bullet loads, click on the Oregon Trail data.

www.gmdr.com
Logged

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
lite loads
« Reply #7 on: December 11, 2004, 04:17:01 PM »
Lite load's in my 45-70.
    12.0 Gr. Bullseye
    350 Gr. cast "MAGNUS" bullet
    100% cotton filler( Pressed in with a punch)



     14.0 CLAY'S
     Rest same as above.

     Both load's shoot around 2" at 75 yds.
Logged

Offline timbertoes

  • Trade Count: (0)
  • Member
  • *
  • Posts: 80
    • http://www.texoma.net/~goonair
Light loads for 45/70
« Reply #8 on: December 12, 2004, 05:39:58 AM »
IMR's SR4759 powder, with 405gr cast bullets will give 1200-1400 fps, which from my use, yields good accuracy in a Handi, and recoil that is not flinch inducing.
compared to shooting remington 305gr factory ammo, which is supposedly trapdoor pressure, the 4759 loads are pussycats.

the best part is that SR4759 is listed as reduced load powder in several other kicker calibers such as 25-06.
Logged
Pages: [1]   Go Up
« previous next »