Author Topic: Bullet weight info needed  (Read 410 times)

0 Members and 1 Guest are viewing this topic.

Offline joeb33050

  • Trade Count: (0)
  • Member
  • *
  • Posts: 80
Bullet weight info needed
« on: December 20, 2004, 01:30:26 AM »
I'm looking for the information on the results of weighing cast bullets. I particularly need the results for heavier cast bullets, over 299 grains. Light is good too. Maybe 22 and 25 caliber bullets. The ideal information would have mold maker/number, and the weights, sort of like this:
Lyman 457125
524.0   1
524.1   0
524.2   6
524.3   8
524.4   19
524.5   32
524.6   76
524.7   41
524.8   28
524.9   11
525.0   12
525.1   7
525.2   2
525.3   0
525.4   1
525.5   2
All responders will receive proper attribution.
Thanks;
joe b.
joeb33050@yahoo.com

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Bullet weight info needed
« Reply #1 on: December 20, 2004, 06:55:18 AM »
joe you are confusing me! What are your plans for this info?

Offline joeb33050

  • Trade Count: (0)
  • Member
  • *
  • Posts: 80
Bullet weight info needed
« Reply #2 on: December 21, 2004, 02:21:22 AM »
This is for an article on bullet weight variation, what variation in bullet weights should we expect in a casting session. I weigh (almost) all bullets cast and put them in .1 grain lines, record the results. I need more heavy and light bullet results.
Merry Christmas;
joe b.

Offline Duffy

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 660
Bullet weight info needed
« Reply #3 on: December 21, 2004, 06:56:25 AM »
If I do my part they generally don't vary more than .5 grain and hover around .3 for a 325 grain bullet. It also depends on your mix that you use and how consistant you can keep it. Usually as the pot get's low the weights will lighten up a bit too.