Author Topic: Stuff fro Savage (Read 565 times)

Longcruise · « **on:** January 08, 2005, 02:28:17 PM »

I'm posting this here cause i think this is the right place. Hopefully, cause I need help with this project.

What I'm doing is fitting my savage 11 short action 7-08 to a Richard's Microfit Stock. I'm about done with the inletting and am ready to glass bed it, so first question: 1. Anybody have a reference on the web on the subject of bedding Savage rifles? Question 2: The plastic triggerguard did not survive the bedding process. Anybody know where I can get another? Plastic or metal is ok.

Hope somebody can help with this.

Seedsntrees · « **Reply #1 on:** January 08, 2005, 06:41:49 PM »

Hello,

Contact BROWNELLS, (641) 623-5401

Thanks,

gunnut69 · « **Reply #2 on:** January 08, 2005, 08:11:38 PM »

This has been hashed out several times and there have been links to sights with detailed instructions for bedding rifles with polyester bedding compounds. Try the search function and read a few of the strings. If you have questions just let us know..

earschplitinloudenboomer · « **Reply #3 on:** January 09, 2005, 08:12:08 PM »

Longcruise;

Check the recoil lug...on at least one Savage, I found the bottom of the recoil lug to be wider than the top, rrrreeeeeeeeeaaaaaaaaaaaaallllllllllllllllllllllllllyyyyyyyyyy hard to get out of the stock!!!

Longcruise · « **Reply #4 on:** January 10, 2005, 06:14:13 AM »

Thanks guys. Brownells had the trig guard. Out of stcok on metal but the plastic is on it's way.

I'll be sure to check the width of the recoil lug!! :eek:

Broken-arrow · « **Reply #5 on:** January 11, 2005, 08:47:47 AM »

Here you go LC.

http://www.savageshooters.com/Articles/Bedding101.html