Author Topic: Pics of my TCU rifle  (Read 1041 times)

0 Members and 1 Guest are viewing this topic.

Offline jason280

  • Moderator
  • Trade Count: (7)
  • A Real Regular
  • *****
  • Posts: 539
Pics of my TCU rifle
« on: June 19, 2005, 02:47:15 PM »
Well, I finally got my 7mm TCU project finished.  Its an older frame, with a 21" factory 7mm TCU barrel.  The scope is a Burris Compact 3-9x32AO in Zee rings.  Entire package weighs less than 6lbs, and so far averages around 1-1.5" with 130gr fireforming loads.  I haven't started working up any hunting loads, but I feel confident the gun will do sub-MOA groups.

Now, all I have to do is teach the girlfriend how to shoot it, and we'll be ready for her first deer season!


"Hey Peter, check out Channel 9!!"

Offline Encore28

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 332
Pics of my TCU rifle
« Reply #1 on: June 19, 2005, 03:42:39 PM »
Nice gun----------
Should be fun working up a load
Encore28
T/C---One Perfect Shot

TCA Member

Offline Lone Star

  • Reformed Gunwriter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2359
  • Gender: Male
Pics of my TCU rifle
« Reply #2 on: June 20, 2005, 03:44:02 AM »
Neat rifle.  What bullets will you be using for deer?  I ask because the 7 TCU is a small cartridge and to maintain good bullet performance you'll need to choose a bullet soft enough to open easily on deer at the lower TCU velocities.  Out of your rifle I'm not certain what the speeds will be, but for a 120-grain bullet I'd guess at ca. 2400 fps.  Most of the heavier 7mm bullets are designed for the higher velocities of the magnums, so a choice of lighter, soft bullets like the Nosler Ballistic Tip is a good idea.  You may already be aware of all this, but for the benefit of others who are not....

Offline jason280

  • Moderator
  • Trade Count: (7)
  • A Real Regular
  • *****
  • Posts: 539
Pics of my TCU rifle
« Reply #3 on: June 20, 2005, 06:09:18 AM »
I'l be sticking with 120gr bullets for deer, either a Sierra SP or a Nosler BT.  I'll keep ranges under 75 yards, which should provided for good expansion and adequate penetration.
"Hey Peter, check out Channel 9!!"

Offline fyrepowrx

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 245
Pics of my TCU rifle
« Reply #4 on: July 01, 2005, 11:55:31 AM »
Jason;

glad to see that you got your TCU all together...i have that exact combo, also with the 21" Factory barrel, and Rynite stocks, but topped mine with a 2x7 Nikon. Makes for a darn fine rifle. Mine is fond of the Hornady 120 spire points and is sure nice to shoot as compared to some of the bigger "beat you senseless" barrels!
8) There is plenty of room for all of God''s Creatures...Right beside the mashed potatoes.. 8)

Offline neil

  • Trade Count: (1)
  • Member
  • *
  • Posts: 40
120 Nosler BT's
« Reply #5 on: July 02, 2005, 12:12:29 AM »
120 gr Nosler BT's have done a fine job for me on deer in a 14 inch barrel so I believe they would do a great job from a 21 inch barrel.

Offline jason280

  • Moderator
  • Trade Count: (7)
  • A Real Regular
  • *****
  • Posts: 539
Pics of my TCU rifle
« Reply #6 on: July 02, 2005, 07:39:47 AM »
Speaking of "beating you senseless barrels", I just bought a .375 Winchester barrel.  220gr bullets at 2000fps out of a 5.5lb rifle should be a lot of fun!!

I really like the set up, but I may end up buying a set of walnut stocks.  That is, if I can find a set for a decent price...
"Hey Peter, check out Channel 9!!"

Offline fyrepowrx

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 245
Pics of my TCU rifle
« Reply #7 on: July 03, 2005, 06:31:38 PM »
I also had a .375 for a while in a carbine...makes for quite a woods-thumper. I didnt seem to shoot it as much as my other "woodswalkin" barrels, a .35 Rem & a custom shop .445 Supermag (that one really hurts!) but if i remember correctly  the .375 was slightly more accurate than the other 2.
8) There is plenty of room for all of God''s Creatures...Right beside the mashed potatoes.. 8)