Author Topic: RCBS UNIFLOW (Read 356 times)

smokey66 · « **on:** January 13, 2005, 03:42:34 AM »

can someone tell me how do you adjust the RCBS Uniflow. i was thinking about adding one to my inventory. i have studied many pictures and i still cannot see how it adjusts. thanks....

Thomas Krupinski · « **Reply #1 on:** January 13, 2005, 03:48:28 AM »

It depends if you have the standard metering screw with locking nut, in which case you turn the metering screw in to lower the charge and out to increase the charge thrown.

If you have the accessory micrometer metering screw, then you don't tighten a locking nut to keep your setting, but just use the settings scribed on the outside to return to the amounts you have previously measured.

smokey66 · « **Reply #2 on:** January 13, 2005, 03:59:44 AM »

Thanks Tom. I thought it was prolly that simple. all of the photos i've seen don't show it from the "adjustment" side....

Questor · « **Reply #3 on:** January 13, 2005, 06:14:36 AM »

I added the micrometer to mine an it's been a great asset because I now am able to read the graduations on the measure and note them in my reloading book. This allows me to return to a particular charge weight with a minimum of trial and error.