Author Topic: Rainier bullets  (Read 712 times)

0 Members and 1 Guest are viewing this topic.

Offline Dusty Miller

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2271
  • Gender: Male
Rainier bullets
« on: December 23, 2004, 09:36:25 AM »
Does anybody here have any experience with the 230 gr. Rainier JHP?  I'd like to know how it feeds.
When seconds mean life or death, the police are only minutes away!

Offline gwindrider1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 446
Rainer bullets
« Reply #1 on: January 11, 2005, 11:58:38 AM »
Dusty,  I've shot a ton of their cast stuff, but didn't realize the made jacketed.

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
Rainier bullets
« Reply #2 on: January 11, 2005, 12:04:20 PM »
Rainier bullets are not actually jacketed. They are plated. But they should work fine for 45acp velocities.   KN

Offline jgalar

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1231
  • Gender: Male
Rainier bullets
« Reply #3 on: January 11, 2005, 04:47:04 PM »
I don't have a 45 but shoot alot of rainier in 9mm. It loads, feeds, and shoots great.

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
Rainier bullets
« Reply #4 on: January 12, 2005, 03:29:08 AM »
I thought I might try them with some of the new "green" lead-free primers for use in indoor ranges. One range I shoot at has good ventilation so it's not a problem. The other one has poor ventilation.  Instead of using the lead-free components I now wear a filter mask to shoot indoors. Not a comfort mask or a dust mask, but one with cannister filters. This works great and I do it because I've been shooting indoors a lot this winter. Filter masks like this are worthwhile for anyone who works with paints, chemicals, or insulations around the home. They cost about $30 and fit great, and they last a long time. They do not interfere with shooting.
Safety first

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
Rainier bullets
« Reply #5 on: January 12, 2005, 03:30:50 AM »
I thought I might try them with some of the new "green" lead-free primers for use in indoor ranges. One range I shoot at has good ventilation so it's not a problem. The other one has poor ventilation.  Instead of using the lead-free components I now wear a filter mask to shoot indoors. Not a comfort mask or a dust mask, but one with cannister filters. This works great and I do it because I've been shooting indoors a lot this winter. Filter masks like this are worthwhile for anyone who works with paints, chemicals, or insulations around the home. They cost about $30 and fit great, and they last a long time. They do not interfere with shooting.
Safety first

Offline bconway84

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
Rainier bullets
« Reply #6 on: January 12, 2005, 09:06:29 AM »
I use them in 45ACP for target loads and have not had any problems at all. I have not had a failure with the 45's in either a Ruger P97 or in my Springfield Champion.
"A superior combat handgunner is best defined as one who uses his superior judgement to avoid situations requiring the use of his superior skills."

Offline zoyter2

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
Hello all, and an opinion
« Reply #7 on: January 15, 2005, 07:38:30 AM »
Hi all.  Just found the forum today....seems pretty cool.

I have found Ranier bullets to be adequate for practice at close ranges, but for accuracy at 25+ yards, they are virtually useless.    I still buy them to reload by the 2-5K deals, but for "real" shooting (competition etc.) I have switched to Remington Golden Sabers in both 9mm and 45ACP.

And thanks so much for the SpellCheck feature!  Unique on forums and very cool.