« previous next »
Pages: [1]   Go Down

Author Topic: o ring trick  (Read 546 times)

0 Members and 3 Guests are viewing this topic.

Offline MIdeerhunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 108
o ring trick
« on: February 06, 2005, 02:30:55 PM »
Will someone please clarify this...does the oring go between the stud and the screw or does it go around the stud so it will rest on the forearm? Will it work the same around the foreend?
Logged
New England Fireams Tracker II plus (USHD) 12 ga
.223 handi rifle
1903A3 Springfield in 6mm rem.
rem. 870 supermag
ruger 10/22
win. x-150
winchester model 88
savage 24

Offline marv

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 575
O - Ring
« Reply #1 on: February 06, 2005, 02:40:13 PM »
Mideerhunter
 The O ring goes around the barrel stud to give clearance between
barrel and forearm. One of mine I used two layers of gasket Meteriak,
 to get clearance. Some O-rings work for some and some it doesn't.
 all I can say is try it you might like it. :-D  :-D  Marv.
Logged

Offline cabezaverde

  • Trade Count: (0)
  • Member
  • *
  • Posts: 33
o ring trick
« Reply #2 on: February 07, 2005, 01:55:07 PM »
I used one of those cheesy white spacers that come with sling swivel studs. Seemed to be the right thickness, and I have about 100 laying around.

Just opened the hole slightly with a drill bit.
Logged
Pages: [1]   Go Up
« previous next »