Author Topic: Any one use open sites?  (Read 1175 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve Ruchala

  • Trade Count: (0)
  • Member
  • *
  • Posts: 63
Any one use open sites?
« on: February 16, 2005, 09:11:24 AM »
Any one useing open sites on their handguns for hunting, either contenders or revolvers?

thanks
steve

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Any one use open sites?
« Reply #1 on: February 16, 2005, 09:17:09 AM »
I have open sight on my 10 inch contender 44 MAG and also on my S&W 500 4 inch model.  :D
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline myronman3

  • Moderator
  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4837
  • Gender: Male
Any one use open sites?
« Reply #2 on: February 16, 2005, 12:29:22 PM »
yep.  scopes are fine for target work, but a pain in the posterior while hunting.  open sights for me.

Online Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26945
  • Gender: Male
Any one use open sites?
« Reply #3 on: February 16, 2005, 12:30:29 PM »
I've actually gone full circle and am back to using only iron sights for my hunting handguns. I've sold off all the TCs and have only revolvers left for handgun hunting. Well except for .22 semiautos. I started handgun hunting about 40 years ago using only iron sights and after moving thru many phases of it I'm not back to irons only.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Any one use open sites?
« Reply #4 on: February 16, 2005, 12:33:53 PM »
Yep I never did care much for scopes on a handgun.  8)
Badnews Bob
AE-2 USN retired

Offline Jerry Lester

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 928
Any one use open sites?
« Reply #5 on: February 16, 2005, 01:22:51 PM »
On handguns, and lever actions, it's only open sights for me.

Offline Pinkerton

  • Trade Count: (5)
  • Contributor
  • ***
  • Posts: 259
Any one use open sites?
« Reply #6 on: February 16, 2005, 03:01:20 PM »
Open sites for my 8" 44 Mag contender and single six. the rest are scoped for me. I'm like Jesus, I love em all.

Offline TScottO

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 778
Any one use open sites?
« Reply #7 on: February 16, 2005, 03:02:30 PM »
Iron sights are what I use as well. I will sometimes use a scope when working up a load… but even then it’s seldom.

Be Safe,
Scott

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Any one use open sites?
« Reply #8 on: February 16, 2005, 04:32:04 PM »
Now I list a couple of guns above I use with open sights, but I still like scopes and red-dots on handguns also.  :D
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
Any one use open sites?
« Reply #9 on: February 16, 2005, 04:53:58 PM »
I used open sights up until about a year back. Now my deer handgun has an Ultra on it. Who knows, maybe I'll be back with the open sights? I used a limited amount of scopes, mostly Leopold M8 2 powers in the past. My dad used to tell me "A wise man reserves the right to change his mind but, a fool never will".  Which ever way, if it works I'm for it. My reply doesn't even sound like good advise, to me, so I guess you'll have to shoot the gun you hunt with and choose for yourself. What's right for me, doesn't mean it's right for you? Don't be popular, be successful.
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!

Offline oso45-70

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1918
  • Gender: Male
Handgun Hunting
« Reply #10 on: February 16, 2005, 07:13:46 PM »
Steve,

I use open sights on all my revolvers 22 32 38 357 44 44-40 44spl 44mag
45 colt 454 different story on rifles...........Joe........


Redhawk1, Good to see the Endowment listed............Joe.........
LIFE NRA BENEFACTOR
LEAA LIFE MEMBER
GOA MEMBER
CCKBA MEMBER
AF & AM
NAHC LIFE
NMSSA MEMBER
ATA MEMBER

Profanity is the crutch of a crippled brain

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18269
Any one use open sites?
« Reply #11 on: February 16, 2005, 10:37:46 PM »
same here I only use open sights I guess its for the same reason i like bow hunting its more of a challange and it makes you have to really hunt not just shoot.
Quote from: Graybeard
I've actually gone full circle and am back to using only iron sights for my hunting handguns. I've sold off all the TCs and have only revolvers left for handgun hunting. Well except for .22 semiautos. I started handgun hunting about 40 years ago using only iron sights and after moving thru many phases of it I'm not back to irons only.
blue lives matter

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Any one use open sites?
« Reply #12 on: February 17, 2005, 01:18:59 AM »
oso45-70, I am working my way up.  :D
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Any one use open sites?
« Reply #13 on: February 17, 2005, 04:20:12 AM »
I use open sights on my 357s and 44 magnums.  Sight them in at 50 yds and limit my shots to those distances, unless I have a picture perfect clear shot out farther and within the range limitations of the loads I am using.  Mikey.

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
Any one use open sites?
« Reply #14 on: February 17, 2005, 06:41:29 AM »
I use the open sights some.  My 2 revolvers, open sights.  My Contenders have barrels both ways, which I take hunting depends on my setup and length of expected shot.

I did shoot a deer this year with my open sighted 45-70 pistol barrel.  First one ever without a scope.  Made me feel kind of proud since I have really had to work hard to become a good shot with the open sights.

Not related to handguns but about two years ago I took the scope off my 209X50 and went back to open sights.  Still shoots plenty good and much easier to clean and carry.

Offline De41mag

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 688
    • De41mag@aol.com
Any one use open sites?
« Reply #15 on: February 18, 2005, 06:47:00 PM »
Yup;

Open sights for me. Several years ago I had a Contender in 41 mag. Missed two bucks. After that it's been only open sights for me. Shot my first buck with a handgun two years ago. Used a Mod. 657, in 41 mag.
I was thrilled, needless to say.  :grin:

Dennis  :D

Offline TennesseeNuc

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 352
Any one use open sites?
« Reply #16 on: February 18, 2005, 07:36:50 PM »
The only open sighted handguns that I have are CCW's.  As my near vision has left me as I have aged, I have had to resort to scopes for my hunting handguns.  Wish I could still maintain that sharp focus on the front sight that I could a few years ago.
Best,
TnNuc

Offline WD45

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 734
Any one use open sites?
« Reply #17 on: February 19, 2005, 02:51:10 AM »
None of my handguns have a scope. Even though my eyes are not what they used to be I still cant bring myself to use one. they dont even look right to me, Kinda like trying to use a lazy boy for a saddle :grin:

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Any one use open sites?
« Reply #18 on: February 19, 2005, 06:44:27 AM »
I have been useing a scope to work up loads for my .44 SBH, that is done so the scope will be coming off.
Also shot my 14" .223 Contender for the first time with no scope,
I can hit a 8" steel plate @ 100yd. every shot and a 12" plate @ 200 yd. almost every shot sitting and shooting off my knees, first time trying this.
can't deside weather or not to put the scope back on.
what do you guy's think.
Failure is not an option
Placer County, Calif.

Offline Glanceblamm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2814
Any one use open sites?
« Reply #19 on: February 19, 2005, 09:51:55 AM »
I really like those open sights. My .45 B/P has a hood on it so this might be cheating a bit :eek:  :) . Those Vaquero sights are just fine from yotes to Deer.
Have to admit though that if I ever own a T/C or Encore it will probably be in a varmint caliber and will wear a scope.

Offline ratgunner

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 663
Any one use open sites?
« Reply #20 on: February 19, 2005, 01:52:28 PM »
Iron sites are all I use on handguns. :D
"Non Gratum Anus Rodentum"

Offline C A Plater

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 218
  • Gender: Male
  • http://tcbunch.com
    • TCBunch.com
Any one use open sites?
« Reply #21 on: February 20, 2005, 10:19:01 AM »
Mine are mixed.  Most of my Contender barrels have optics but a couple still are iron.  Of my revolvers, only one has a dot, the other are all iron.  My Ruger MkII .22 has a small dot but every other auto has iron.  Generally any thing that is bottle neck is usually scoped and a long range (for pistol) shooter.  If they are strait wall, iron, with a dot here and there.

Offline LMM

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 173
Any one use open sites?
« Reply #22 on: February 20, 2005, 11:27:56 AM »
Open sights, my favorite for hunting are the Williams Fire Sights.
LMM


"If you can blame guns for killing people, then I can blame my pencil for misspelled words."
--Larry the Cable Guy

Offline Zachary

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3713
Any one use open sites?
« Reply #23 on: February 22, 2005, 09:29:42 AM »
I use iron sights almost exclusively.  Truth be told, I carry my revolvers (Taurus RBs in .454 and .480) as a back-up to my rifles.  Why?  Well, when deer hunting, sometimes you come across a big hog up close and personal and trying to swing a scoped rifle around (even set at it's lowest magnification) is just crazy.

I do have one RB in .454 that has a Burris scope on it.  I have taken it to the range and shot it a few times, but you just can't carry such a volkswagon around your belt as a back-up.  

However, if I ever go JUST hog hunting and hunt from a blind, then I might just hunt exclusively with the scoped .454.

Zachary