« previous next »
Pages: [1]   Go Down

Author Topic: trigger for Reminton 721  (Read 501 times)

0 Members and 1 Guest are viewing this topic.

Offline dtingey

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
trigger for Reminton 721
« on: August 12, 2005, 05:56:23 AM »
Can a complete trigger assembley from a Rem. 700 be dropped in to a Rem. 721?
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
trigger for Reminton 721
« Reply #1 on: August 12, 2005, 09:37:24 AM »
Timney has triggers that fit both the 700 and the 721-722..  The difference seems to be in the safety lever.  I don't know for certain but would bet they could be fitted.  They mechanism is on both is quite similar with just a few manufacturing process changes..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline dtingey

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
trigger for Reminton 721
« Reply #2 on: August 12, 2005, 11:37:55 AM »
Gunnut69, thanks for reply.  I know about Timney and they have an ultra light safety to be installed on their trigger. Looking at about $100, where as if a 700 assembly would drop in I could do it for about $40. Any more suggestions from anyone? Thanks
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
trigger for Reminton 721
« Reply #3 on: August 13, 2005, 12:12:22 PM »
Just curious>>why are you wanting to swap triggers that are essentially the same?
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline 260 AAR

  • GBO Supporter
  • Trade Count: (0)
  • Avid Poster
  • *****
  • Posts: 112
    • http://www.kailuacustom.com
trigger for Reminton 721
« Reply #4 on: August 15, 2005, 07:07:00 AM »
The 700 trigger will work. You may have to dink with the safety lever a bit but it`ll go. As Gunnut said tho---the Timney is a better way to go. More expensive but just a better trigger. That is why I have lots of 700 triggers and parts!!LOL

Aloha, Mark
Logged
Hawaii No Ka Oe!

Offline dtingey

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
trigger for Reminton 721
« Reply #5 on: August 15, 2005, 11:27:11 AM »
Mark, do you have any complete 700 trigger assemblys for sale? Thanks Dan
Logged
Pages: [1]   Go Up
« previous next »