Author Topic: Home brewed lube for conicals?  (Read 785 times)

0 Members and 1 Guest are viewing this topic.

Offline hans g./UpS

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 273
Home brewed lube for conicals?
« on: February 11, 2005, 07:48:26 AM »
A friend is determined to use conicals in his 50 cal. Renegade.I've been using 4:1 or 7:1 olive oil/beeswax for patch lube.
Would either work adequately[especially in summer]?,would they adhere without melting off/flaking off while being carried?
Thanks.

Offline Ramrod

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1440
Home brewed lube for conicals?
« Reply #1 on: February 11, 2005, 12:11:08 PM »
Sounds a little soft for bullets. Maybe replace the oil with animal fat or Crisco shortening. Look around this forum, there are lots of lube threads.
"Jesus died for somebody's sins, but not mine." Patti Smith

Offline lonewolf7396

  • Trade Count: (0)
  • Member
  • *
  • Posts: 49
CONICALS LUBE
« Reply #2 on: February 11, 2005, 12:28:42 PM »
I seem to favor a 50/50 mix of beeswax and criso and :D  a tablespoon of olive oil on my REALS conicals :D

Offline roundball

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 375
Re: Home brewed lube for conicals?
« Reply #3 on: February 11, 2005, 01:29:25 PM »
Quote from: hans g./UpS
A friend is determined to use conicals in his 50 cal. Renegade.I've been using 4:1 or 7:1 olive oil/beeswax for patch lube.
Would either work adequately[especially in summer]?,would they adhere without melting off/flaking off while being carried?
Thanks.


I use a tube of TC's Natural Lube 1000 and screw on luber attachment to lube .45cal maxi-hunters...outstanding lube
"Flintlocks.......The Real Deal"
(Claims that 1:48" twists won't shoot PRBs accurately are old wives tales!!)

Offline clodbuster

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 551
  • Gender: Male
lubed conicals
« Reply #4 on: February 12, 2005, 01:03:54 PM »
hans;  Why you say "a friend is determined to shoot conicals in his Renegade" .  I shoot them exclusively for hunting and they work great.  Very accurate and deadly.  My Renegade likes Buffalo Bullet 385gr HPHB over 80 gr of Swiss ff.  Fill the base hole with described lube and a felt wad over the powder.
Preserve the Loess Hills!!!

Offline Longcruise

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 781
    • http://www.mikeswillowlake.com
Home brewed lube for conicals?
« Reply #5 on: February 12, 2005, 01:48:23 PM »
I'm with roundball on the TC 1000 and also the lube attachemnt can be had in .50 and .54 cal too.   If you want something stiffer get the Wonder Lube in the plastic tub.  It's the same thing just harder.  You can put it in a shallow plastic container and melt it in the mircrowave and then put the conicals in upright with the melted lube at just the right level.  once hardened you can push em out just like any other pan lube operation.

Offline TooTall

  • Trade Count: (1)
  • Member
  • *
  • Posts: 18
Re: Home brewed lube for conicals?
« Reply #6 on: February 14, 2005, 03:06:15 PM »
[/quote]

I use a tube of TC's Natural Lube 1000 and screw on luber attachment to lube .45cal maxi-hunters...outstanding lube[/quote]

Where can I purchase a luber attachment?  Thanks

Offline Longcruise

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 781
    • http://www.mikeswillowlake.com
Home brewed lube for conicals?
« Reply #7 on: February 14, 2005, 05:07:17 PM »
Quote
Where can I purchase a luber attachment? Thanks


I bought mine in a local shop.  You can probably call TC and order directly or get their little freebee handout catalog that most gun stores have and order from it.  The only run 4 or 5 bucks.

Offline TooTall

  • Trade Count: (1)
  • Member
  • *
  • Posts: 18
Home brewed lube for conicals?
« Reply #8 on: February 15, 2005, 01:49:32 PM »
Thanx :P