« previous next »
Pages: [1]   Go Down

Author Topic: 45/70 SHORT.....?  (Read 997 times)

0 Members and 1 Guest are viewing this topic.

Offline Alaninga

  • Trade Count: (0)
  • Member
  • *
  • Posts: 39
45/70 SHORT.....?
« on: January 31, 2005, 02:00:16 PM »
I enjoy paper patching .458 caliber rounds. I find the 45/70 to be too large a powder capacity to use in 12 or 14" barrels. Has anyone wanted a .458" bore rimmed round? I have a 45/70 case I cut to 1.5"length and  think it would work great in the Contender Pistol. I have had a 45 Win Mag but it is of course a .451 or .452" bore. With all the 45/70 fans I've wondered why a short case wildcat has not been made. Lots of .452" cases,,no .458" cases that I remember.
alan in ga.
Logged

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
45/70 SHORT.....?
« Reply #1 on: January 31, 2005, 03:48:11 PM »
What would you gain with a .006" increase in diameter over a 45 colt or win mag? Seems like a lot of work for no reason. Thats just my $.02 though.   KN
Logged

Offline Alaninga

  • Trade Count: (0)
  • Member
  • *
  • Posts: 39
could be just that,,,,,,
« Reply #2 on: January 31, 2005, 06:10:49 PM »
a lot of work for nothing. I'm talking and thinking this,,not doing it,,that would come later.
Logged

Offline unspellable

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 776
Short 45-70
« Reply #3 on: February 01, 2005, 02:26:14 AM »
You are talking about an already existing wildcat.  You will find it in some editions of Cartridges of the World.  It was originally developed as a silhouette revolver cartridge where heavy bullets are the order of the day.  The 0.458 bullet diameter was chosen to allow use of the wide range of 0.458 rifle bullets available.
Logged

Offline Alaninga

  • Trade Count: (0)
  • Member
  • *
  • Posts: 39
Easy Paper Patch bullet...
« Reply #4 on: February 01, 2005, 02:39:37 AM »
a quick and very easy and capable lead bullet for paper patching in any .458" rifle is the SPEER SWC .451 Swaged Lead Pistol bullet>weighs 250 grains. I have one I saved after it went all the way thru an 8 pt. buck and was found under hide in front leg after penetrating the body. Nothing like a bubble gum soft lead bullet that will expand from here to there without cracking or breaking into pieces.
Logged

Offline Dan Chamberlain

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 406
.45-70 Short
« Reply #5 on: February 01, 2005, 02:30:07 PM »
Why would you want a .458 bore, to paper patch a bullet that is .451?  Can't you just use gas checked .452s and get all the velocity you can handle related to recoil?  I understand wanting to use softer lead, but you really don't need it for deer and bear.  Just a thought.

However, another wild cat that intrigues me is the .375 short.  It's almost exactly between the .357 and the .41 Mag, just like the .44 mag is just in between the .41 and the .45!  You could chamber it in a black hawk and get the velocities of a .357 mag with bullets as heavy as 200 grains!  Just cut down .375 Winchester brass to .357 length and find someone who would chamber and barrel a good Blackhawk or Super.  If you used a super, you could probably push the brass a tad longer than the .357!

Dan C
Logged

Offline TScottW99

  • Trade Count: (0)
  • Member
  • *
  • Posts: 92
  • Gender: Male
  • ΜΟΛΩΝ ΛΑΒE
    • Scouting for wildlife
45/70 SHORT.....?
« Reply #6 on: February 02, 2005, 09:33:34 AM »
Well Bill Alexander came up with a 45-70 cartridge, shortened to fit in an AR-15 mag but with a .50 call bullet.  It's called the .50 Beowulf.


http://www.alexanderarms.com/website/id4.html
Logged
"Let us speak courteously, deal fairly, and keep ourselves armed and ready."

-Theodore Roosevelt

Offline Geno

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 140
45/70 SHORT.....?
« Reply #7 on: February 02, 2005, 11:20:40 AM »
I beleive the .475 Linebaugh and the .480 Ruger were both based off a shortened 45/70, using a .475 diameter bullet.
Logged

Offline Alaninga

  • Trade Count: (0)
  • Member
  • *
  • Posts: 39
.375 Win SHORT?......almost....
« Reply #8 on: February 02, 2005, 12:32:21 PM »
I did buy a used Super 14 in .357 Herret today. It, opened up, would be a .375 Herret???
Too much thinking going on here!

I had a Super 14 in .35 Rem about 20 years ago I guess. Great accuracy,,all the 2X Leupold EER pistol could extract from it.


Don't ask.-- - - - - I bought the .357 Herret,,,,just,,,because.
alan in ga.
Logged

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
45/70 SHORT.....?
« Reply #9 on: February 04, 2005, 11:49:33 AM »
I would much rather have a shortened 50 Browning! Now that would be one hell of a crap storm in a handgun.
Logged
What doesn't kill us, makes us stronger!

Offline 45 2.1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 52
45/70 SHORT.....?
« Reply #10 on: February 05, 2005, 01:45:47 PM »
There is an article on the 4570 short 1.575" case in the current CBA "Fouling Shot".
Logged

Offline Alaninga

  • Trade Count: (0)
  • Member
  • *
  • Posts: 39
sure would like to see it.
« Reply #11 on: February 05, 2005, 05:53:09 PM »
I am about to purchase a standard 45/70 12" Contender Custom Shop bull barrel. Buddy says to just 'download' it. If that barrel warrants it,,might build a 1.5" 45/70 "short".
any way to get that article short of subscribing?
alan in ga.
Logged

Offline Malamute

  • Trade Count: (0)
  • Member
  • *
  • Posts: 51
45/70 SHORT.....?
« Reply #12 on: February 16, 2005, 02:44:11 PM »
The 45-60 Winchester as was chambered in the 1876 Winchester was a shorter version. Don't recall the exact length. Check your copy of "Cartridges Of The World". Brass from 45-70 is used for this round, just trimmed for length.

 The 475 Linebaugh Maximum may work for what you want, perhaps without the neck reaming or expanding to .475 diameter.
Logged
Pages: [1]   Go Up
« previous next »