Author Topic: Pictures 2nd Cannon Shoot, Brooksville, Florida  (Read 822 times)

0 Members and 1 Guest are viewing this topic.

Offline Cpt Ed

  • GBO Supporter
  • Trade Count: (0)
  • Avid Poster
  • *****
  • Posts: 209
  • Gender: Male
Pictures 2nd Cannon Shoot, Brooksville, Florida
« on: April 10, 2005, 02:15:44 PM »
Gentlemen, here are some pictures of the second cannon shoot we had at the Hernando Sportsman’s Club range near Brooksville, Florida. The targets were 3’ x 4’ panels set out at 200 meters. Some of us had hits, I had one near the center of the panel with my half scale 1.5” Parrott smoothbore. It was a lot of fun.  :grin:







Always think safety...be a More Complete Cannoneer.

"I HATE SMALL TOWNS BECAUSE ONCE YOU'VE SEEN THE CANNON IN THE PARK, THERE'S NOTHING ELSE TO DO."

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #1 on: April 10, 2005, 02:27:35 PM »
1/2 scale 1.5" Parrott?  That means 0.75" diameter bore (about 12ga).

AND LOOK AT THAT 3/4" one-hole group!

Seriously, that's good shootin'!!  200 yards is a ways off for any smoothbore!

Looks like you had some good company there too, with a variety of shootin' irons.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline Cpt Ed

  • GBO Supporter
  • Trade Count: (0)
  • Avid Poster
  • *****
  • Posts: 209
  • Gender: Male
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #2 on: April 10, 2005, 04:47:43 PM »
Quote
1/2 scale 1.5" Parrott? That means 0.75" diameter bore (about 12ga).


Hello  CW,

My 1/2 Scale Parrott has a bore diameter of 1.497" and shoots a 12 oz lead round ball. This Barrel was made by SBR.
Always think safety...be a More Complete Cannoneer.

"I HATE SMALL TOWNS BECAUSE ONCE YOU'VE SEEN THE CANNON IN THE PARK, THERE'S NOTHING ELSE TO DO."

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #3 on: April 11, 2005, 12:53:55 AM »
Quote from: Cpt Ed
Quote
1/2 scale 1.5" Parrott? That means 0.75" diameter bore (about 12ga).


Hello  CW,

My 1/2 Scale Parrott has a bore diameter of 1.497" and shoots a 12 oz lead round ball. This Barrel was made by SBR.



So that's a group of under 1-1/2"!  Still good.  

My experience is with mortars, which are at the other end of the spectrum from benchrest guns.  

That grin was EARNED!
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #4 on: April 11, 2005, 03:38:18 AM »
Actually, CW that group is far better than that.  Groups are measured CTC.  His gruoup is the ultimate .000!

Offline intoodeep

  • GBO Supporter
  • Trade Count: (5)
  • A Real Regular
  • *****
  • Posts: 776
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #5 on: April 11, 2005, 04:42:07 AM »
A grouping like that would Great!!! However, I believe that Cpt Ed is saying that he had one hit in the target. Which is still pretty good.  :grin:
If you make it idiot proof, then, someone will make a better idiot.


Offline Cpt Ed

  • GBO Supporter
  • Trade Count: (0)
  • Avid Poster
  • *****
  • Posts: 209
  • Gender: Male
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #6 on: April 11, 2005, 08:22:36 AM »
Thank you "intoodeep"  :D

I'm Glad you understand, however, all shots were in the berm.    :biggun:
Always think safety...be a More Complete Cannoneer.

"I HATE SMALL TOWNS BECAUSE ONCE YOU'VE SEEN THE CANNON IN THE PARK, THERE'S NOTHING ELSE TO DO."

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #7 on: April 11, 2005, 12:05:22 PM »
Quote from: Double D
Actually, CW that group is far better than that.  Groups are measured CTC.  His gruoup is the ultimate .000!



I stand (sit?) corrected.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #8 on: April 11, 2005, 12:36:54 PM »
Sighters and ranging shots don't count.  He hit the target and has a one shot CTC group of .000...so decree your board moderators. Who could doubt us.    :-D

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #9 on: April 11, 2005, 12:54:55 PM »
Quote from: Double D
Sighters and ranging shots don't count.  He hit the target and has a one shot CTC group of .000...so decree your board moderators. Who could doubt us.    :-D



Especially when we have the ability to delete their post!



Did I really say that?
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #10 on: April 11, 2005, 01:01:27 PM »
Quote from: Cpt Ed
I'm Glad you understand, however, all shots were in the berm.    :biggun:



I understand that.  The realization that the mortar round cleared the mountain behind the back stop way behind the range still has me wondering where in the National Forrest that round ended up!

Some of us learn slowly.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline Cpt Ed

  • GBO Supporter
  • Trade Count: (0)
  • Avid Poster
  • *****
  • Posts: 209
  • Gender: Male
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #11 on: April 12, 2005, 02:12:32 PM »
Cat Whisperer wrote:

Quote
I understand that. The realization that the mortar round cleared the mountain behind the back stop way behind the range still has me wondering where in the National Forrest that round ended up!


OK, OK,

So you were there at our first Cannon/Mortar Shoot in November 2004? Was that your Mortar that launched that missile into orbit, never to be seen again??  Newton’s Law; what goes up must come down. And yes either in the National Forrest on in the Gulf of Mexico.

 Remember that  Experienced Cannoneers have control of their bawls!!  (Projectiles).

I think that another member of your forum must have said that??
Always think safety...be a More Complete Cannoneer.

"I HATE SMALL TOWNS BECAUSE ONCE YOU'VE SEEN THE CANNON IN THE PARK, THERE'S NOTHING ELSE TO DO."

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Pictures 2nd Cannon Shoot, Brooksville, Flo
« Reply #12 on: April 12, 2005, 02:41:37 PM »
No  wasn't me.  I guess I was feeling the competition - since another guy had launched one over the mountain with his store-bought mortar I figured I just had to do it too.


I've done all my mortar shooting in Iowa, Vermont, Massachussets and Virginia.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)