« previous next »
Pages: [1]   Go Down

Author Topic: Marlin Cowboy in 38sp question  (Read 420 times)

0 Members and 1 Guest are viewing this topic.

Offline Sixgun

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 425
  • Gender: Male
Marlin Cowboy in 38sp question
« on: February 18, 2005, 03:57:34 AM »
I shoot Cowboy Rifle Silhouette using a Rossi 92 in 357 mag with a RCBS 180gr sil cast bullet.  My load is 10 gr of AA9 with a CCI Small Pistol Primer and the RCBS sail bullet which weighes 190 gar from my mold.  I use a 38sap case for this load because OAL is to long using a 357 mag case when the crimp is in the cannelure.  I get right at 1300fps with this load with no signs of pressure.  According to my calculations, I get a .83 foot pounds per second at the 200 meter ram, which seems to be enough because it knocks them down every time I can hit them.

My buddy wants to try my load in his Marlin Cowboy in 38 Special, for the same purpose.  I figure that his action is probably just as strong as the action on a regular 1894 Marlin and it should handle the load fine.  

Any opinions on this?  Let me know what you think!

Sixgun
Logged
You can only hit the target if the barrel is pointed in the right direction when the bullet leaves the barrel.

Offline RugerNo3

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 202
  • Gender: Male
Marlin Cowboy in 38sp question
« Reply #1 on: February 20, 2005, 03:54:42 AM »
The Marlin 38 Special Competition is strong enough, but the chamber may not be LONG enough. Test carefully as a teardown may be necessary to get a stuck case out if it don't chamber all the way. Good luck.
Logged
"Use a big enough gun!"
Pages: [1]   Go Up
« previous next »