Author Topic: reloading for tikka .308  (Read 448 times)

0 Members and 1 Guest are viewing this topic.

Offline vlad

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
reloading for tikka .308
« on: February 20, 2005, 03:59:36 PM »
Anybody got any pet loads for a .308? The tikka has a 22" barrel, twist of 1:11. Please let me know what your oal is as well as the other particulars. Many thanks in advance.....vlad

Offline jd45

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 537
reloading for tikka .308
« Reply #1 on: February 21, 2005, 03:17:59 PM »
Excuse me for stickin my nose in here, but I just couldn't resist givin you my recipe. No, I'm not shootin a Tikka; I'm shootin a Remington Varmint Synthetic with a 26" barrel. It has a 1 in 12 twist. I'm using Norma brass; Federal 210 match primers;  44grs of Hodgdon's Varget powder under a Hornady 165gr Spire-Point boattail, or an Interbond-same weight. I'm gettin 1 inch groups @ 200yds. That's right.....200yds. I can't tell you about oal, as your rifle is different than mine, but maybe you can incorporate some of this info, and hopefully get good results. Good Luck! jd45.

Offline vlad

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
Thanks alot JD!!
« Reply #2 on: February 23, 2005, 07:40:20 PM »
Any help is always welcomed- thanks again, Vladamir

Offline jd45

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 537
loads for a .308 tikka
« Reply #3 on: February 24, 2005, 03:36:04 PM »
Vlad, you might want to check out Hodgdon.com, where you can get load data. They list 150, 168, & 175 grain bullet data. The powder weights are maximum, so take off 10% from them & work up. jd45.