Author Topic: Winchester and tough loads  (Read 550 times)

0 Members and 1 Guest are viewing this topic.

Offline Sverre A.

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 512
Winchester and tough loads
« on: March 04, 2005, 09:26:33 PM »
How tough huntingload can a Winchester handle?
Will the rifle accept hardcast with a  0,3" meplate without any feedingproblem?

Offline John Traveler1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
winchester
« Reply #1 on: March 04, 2005, 09:40:55 PM »
Sverre,

If I understand your question correctly, you are asking if your Winchester lever action rifle (model 1894?) will handle hardcast 0.3" diameter flat tipped bullets.  That probably means your rifle or carbine is chambered for .45 Colt or .44 Magnum.

YES, the Winchester 1894 will safely handle the full range of factory loaded or handloaded equivalent ammunition.  The lever action is limited to a maximum cartridge length that will allow the ammunition to feed and or eject reliably.  It's probably best to use factory ammunition as a guide for loading your maximum cartridge length.  Function testing of course is needed to ensure feeding reliability.

John

Offline Sverre A.

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 512
Winchester and tough loads
« Reply #2 on: March 04, 2005, 10:22:28 PM »
Forgot to mention that it was a 94 in 45 LC.

Offline Sverre A.

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 512
Winchester and tough loads
« Reply #3 on: March 04, 2005, 11:21:28 PM »
I have a good load in my Ruger Bisley - 350 gr./H110-21 gr. - which I also would use in the Winchester.

Offline Castaway

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1105
  • Gender: Male
Winchester and tough loads
« Reply #4 on: March 04, 2005, 11:33:08 PM »
I load a Lee, 255 grain, RNFP with a meplat of 0.32" in my Winchester 94 (Trapper) without any problems