Author Topic: Reduced loads for the 3006  (Read 845 times)

0 Members and 1 Guest are viewing this topic.

Offline anthony passero

  • Trade Count: (0)
  • Member
  • *
  • Posts: 93
Reduced loads for the 3006
« on: March 03, 2005, 10:49:10 AM »
Anyone use reduced loads in an 3006? i am curious if anyone ever downloads it for deer/plinking and target shooting as well as varmints. What are your reduced loads if you use them?Anthony

Offline savageT

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1594
Reduced loads for the 3006
« Reply #1 on: March 03, 2005, 04:22:15 PM »
Anthony,
Try going to the Hodgdon Powder Site, click on Smokeless, YOUTH loads.
There it says to use ONLY H4895 and multiply max loads by 60%.  Now on the left-hand margin is a listing of calibers: click on 30-06 and you will see some lighter weight bullets listed using H4895.
Good Luck!


Jim
savageT........Have you hugged a '99 lately?

Of all the things I've lost in my life, I miss my mind the most.

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Reduced loads for the 3006
« Reply #2 on: March 03, 2005, 07:41:17 PM »
anthony:

Pick up a Lyman 48th edition reloading manual...they have almost  a whole page with cast bullets as reduced loadings...and the Speer #13 reloading manual has reduced loads for jacketed bullets in it...

Mac
You can cry me a river... but...build me a bridge and then get over it...

Offline Dand

  • GBO Supporter
  • Trade Count: (35)
  • Senior Member
  • *****
  • Posts: 2974
yeah they can be great
« Reply #3 on: March 03, 2005, 10:53:38 PM »
its been a long time but I was teaching a young man about hunting. I loaded some 130 gr Speers and 150 gr bullets with light loads of IMR 4895.  They were very pleasant to shoot and one was very accurate. I'd have to do some digging to find the load.  Most Speer manuals list light loads at the very bottom or end of the data for each cartridge. Go for it.
NRA Life

liberal Justice Hugo Black said, and I quote: "There are 'absolutes' in our Bill of Rights, and they were put there on purpose by men who knew what words meant and meant their prohibitions to be 'absolutes.'" End quote. From a recent article by Wayne LaPierre NRA

Offline Con

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 149
Reduced loads for the 3006
« Reply #4 on: March 05, 2005, 01:33:31 AM »
If you do a search on "Blue Dot" the AR reloading forum, you'll find a heap of information regarding using that powder for reduced jacketed loads. Just be very careful as your playing with loads that are below 50% case capacity and a double loading of Blue Dot wont be nice. For what it's worth I've used Blue Dot to load reduced jacketed loads using a 123gr and a 147gr projectile in a 7.62x54R (M44). I've had the 123gr move out the barrel from 2200fps through to 2500fps, and the 147gr from 1900fps to 2200fps. Both loads make great practice rounds.
Cheers...
Con

Offline tanoose

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 839
  • Gender: Male
Reduced loads for the 3006
« Reply #5 on: March 05, 2005, 04:00:37 AM »
Anthony i only did it once as i always use the same loads at the range that i hunt with, but i was curious one day , hears the load-Using remington brass and cci-200 large rifle primers IMR4350--45.0 grains--using remington 180grain PSPCL bullets . This load is in the Hornady manual as the lowest load with that powder at 2200 fps. Recoil was very light  in my remington 700 bolt action.  I have found this powder the best and most accurate in my 30/06's with both 150 and 180 grain bullets. Hunting loads i use are 59.0 with 150 grain bullets and 57.0 for the 180 grain bullets.

Offline Val

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 846
Reduced Loads
« Reply #6 on: March 19, 2005, 03:34:47 AM »
The Speer reloading manual has lots of reduced loads for most of the calibers and bullet weights. You need to be careful when playing with reduced loads.
Hunting and fishing are not matters of life or death. They are much more important than that.