« previous next »
Pages: [1]   Go Down

Author Topic: Do you have pics of your Gunstocks Inc. makeover?  (Read 1086 times)

0 Members and 1 Guest are viewing this topic.

Offline Mamba_Driver

  • Trade Count: (3)
  • Member
  • *
  • Posts: 81
  • Gender: Male
    • http://home.comcast.net/~ronweiser/
Do you have pics of your Gunstocks Inc. makeover?
« on: March 10, 2005, 07:50:09 AM »
I have a 12ga. TDC barrel fitted to an SB2 frame and need a new stock set to go with it.  I'm contemplating a Gunstocks straight pistol grip buttstock and a Schnable forend in a laminate.  Their Brown/Brown laminate or the Autumn Laminate.  Their web site photos/color charts leave something to be desired.

Does anyone have "real" pictures that they'd like to post?  I've talked to them a couple of times and they are extremely nice and helpful.  But,... it's almost like buying unseen.  I'd like to get an idea of what the laminates look like before I purchase.

Thanks for the help.  Any other thoughts or words of wisdom about Gunstocks offerings?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Do you have pics of your Gunstocks Inc. mak
« Reply #1 on: March 10, 2005, 08:42:25 AM »
Mine's still on the back burner, but Mac has his almost done the last time I saw a post on it....

http://www.graybeardoutdoors.com/phpbb2/viewtopic.php?t=51657&highlight=gunstocks+inc+mac
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Mamba_Driver

  • Trade Count: (3)
  • Member
  • *
  • Posts: 81
  • Gender: Male
    • http://home.comcast.net/~ronweiser/
Do you have pics of your Gunstocks Inc. mak
« Reply #2 on: March 10, 2005, 12:25:36 PM »
Thanks quick, those are beautiful!  Wow!  I think a ran across a writeup on fitting the Gunstocks stock sets to the Handi receiver and barrel,... was that Mac that did the writeup?  

What setup did you go with? :D
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Do you have pics of your Gunstocks Inc. mak
« Reply #3 on: March 10, 2005, 12:40:52 PM »
Similar to Mac's but not as nice as his. His stock is the bottom pic...he's got nicer wood, an installed Limbsaver and other options.



Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline roostertails

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
Do you have pics of your Gunstocks Inc. mak
« Reply #4 on: March 10, 2005, 01:38:57 PM »
Here is a set I got from Gunstocks Inc. Mannlicher forend and a roll-over buttstock on a 45-70, don't have it finished or the nose cap put on.

Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Do you have pics of your Gunstocks Inc. mak
« Reply #5 on: March 10, 2005, 02:49:59 PM »
Oh Boy!!! If that doesn't wet Mamba Drivers appetite for one of those stocks I don't think anything will!!! Great looking pictures of great looking stocks, Thanks to all of you....<><.... :grin:

any more pictures out there???
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline DakotaElkSlayer

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 898
Do you have pics of your Gunstocks Inc. mak
« Reply #6 on: March 10, 2005, 04:57:39 PM »
Roostertails,
Now that is what I am talking about!!!  Did they just put one of your Mannlicher-style forearms in a stock duplicating machine?

Jim
Logged
He who joyfully marches in rank and file has already earned my contempt. He has been given a large brain by mistake, since for him the spinal cord would suffice.

- Albert Einstein

Offline Mamba_Driver

  • Trade Count: (3)
  • Member
  • *
  • Posts: 81
  • Gender: Male
    • http://home.comcast.net/~ronweiser/
Do you have pics of your Gunstocks Inc. mak
« Reply #7 on: March 10, 2005, 05:00:29 PM »
quickdtoo, those are fantastic looking.  As soon as you get your project done, post some pictures,...please!!!

roostertails, what can I say!!  If that's a pic of the unfinished product, I can't wait to see the end result.  You must be happy as a pig in mud!!  Is that the Autumn Camo?

Thanks guys for the pics.  They look like really nice stock sets.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Do you have pics of your Gunstocks Inc. mak
« Reply #8 on: March 10, 2005, 05:06:34 PM »
Mine should have been done by now, but for me to do finish work so it comes out nice, I have to be in the mood for it, and twix my other projects, it gets pushed to the back burner. Just finished a portable shooting table so I can do some range work away from the actual shooting range. Also the wife made me build her another book case for her sci-fi paperbacks, she just got thru counting them, almost an even 1000....sheesh! :roll:
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Paul5388

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 888
  • Gender: Male
Do you have pics of your Gunstocks Inc. mak
« Reply #9 on: March 10, 2005, 05:19:09 PM »
I don't know if Stuffit will see this post, but here's the BC he's working on with a Gunstock Inc stock.



I'll let him post more, since I don't want to steal all of his thunder!
Logged

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Do you have pics of your Gunstocks Inc. mak
« Reply #10 on: March 10, 2005, 07:06:27 PM »
I kinda messed up my forearm abit...and I'm going to get in touch with Ed up at GunStocks Inc. and see if he can help me out with it...otherwise I would post a pic of it...hopefully I can get a replacement forearm for it...


Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...

Offline stuffit

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 303
BC restock progress
« Reply #11 on: March 11, 2005, 08:55:37 AM »
All right, Paul,  Here are the other two shots of the BC stocking progress.  It still will get a couple more coats of Linspeed, and the buttstock juncture needs some careful fitting.  I have the barrel channel at a point where it fits, but thinking of a glass bedding job before I wind things up.   :lol:




If anyone has an helpful hints on fitting the buttstock (like "foolproof" and "fail safe", I'd be oblidged of any input.  I'm getting out my wood rasps today for that part of the project.   Also looking for recommedations on a glass bedding kit, in case I decide to go this way.  Oh!  Did y'all get the necessary longer forend screw with the stocks, and if not, where did you find one.  I'm using a hardware store special at the present for fitting.  
 :wink:
stuffit

after comment:  Right after I posted this, an envelope containing the needed forend screw arrive via snail mail from gunstocks.  Color me "impatient".   :lol:
s
Logged
Everybody changes their minds sometimes but a fool and a mule.

Deceased

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Do you have pics of your Gunstocks Inc. mak
« Reply #12 on: March 11, 2005, 09:01:01 AM »
Quote
Oh! Did y'all get the necessary longer forend screw with the stocks, and if not, where did you find one. I'm using a hardware store special at the present for fitting.


Lookin good!! I got the screw with mine, I'd email Ed and have em send it to you....although one should be found in the Ace or TrueValue flat head machine screw selection, may not be black, though, which is easy to remedy....
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline roostertails

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
Do you have pics of your Gunstocks Inc. mak
« Reply #13 on: March 11, 2005, 09:06:49 AM »
WOW!! that is a fine looking set of stocks you got there stuffit, I have always received a screw with the forends I got. Just e-mail Gunstocks Inc. and tell them you never got a longer screw with your forend and I bet they will send you one.
Logged

Offline stuffit

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 303
forend screw
« Reply #14 on: March 11, 2005, 09:19:46 AM »
quickdtoo & roostertails,

They did send one.  I had called but I never take anything for granted, sometimes not even after it's in hand.  lol  But it arrived today right after my first post and I've already tried it and it is correct.  So onward and upward.  Into the breach, brave rifles......  etc.... off to the fitting.
 :wink:
stuffit
Logged
Everybody changes their minds sometimes but a fool and a mule.

Deceased

Offline borg1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 312
Do you have pics of your Gunstocks Inc. mak
« Reply #15 on: March 11, 2005, 09:39:29 AM »
Great stocks folks!!!

I've been eyeing one of those for some time.  These pics have cinched the deal.

[now to figure out how to tell the wife]   :)  :)  :)  :)
Logged

Offline roostertails

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
Do you have pics of your Gunstocks Inc. mak
« Reply #16 on: March 11, 2005, 11:30:31 AM »
Hey borg1,
Are you a mouse or a man :lol:
I have a good freind and when I ask him if he want to go shot or go have a cold one he always says to me, I will have to ask my wife, then I ask him if he's a mouse or a man and his answer is :wheres the cheese"
Logged
Pages: [1]   Go Up
« previous next »