« previous next »
Pages: [1]   Go Down

Author Topic: Cutting Down Encore Barrel Length?  (Read 586 times)

0 Members and 2 Guests are viewing this topic.

Offline tjkanavel

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 119
Cutting Down Encore Barrel Length?
« on: March 14, 2005, 01:15:55 PM »
i have a 26" 300 win mag barrel that i would like to cut down a few inches. i am trying to save a little weight (alot of mountains up here) but i dont want to mess up ballistics or anything. i just wanted to know if anyone else has done,what the results have been,and how much they cut off.i see barrels all the time in the 20-22" range.any help would be greatly appreciated.thanks
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Cutting Down Encore Barrel Length?
« Reply #1 on: March 14, 2005, 01:41:39 PM »
I don't think you would knock off much weight by cutting back 4 to 6 inches of barrel.  You may want to look at a compact scope and a synthetic stock and forearm. But if you want to knock a few oz. of weight I guess you could go to a 22 inch barrel and have it recrowned. Or check and see if anyone can have your barrel fluted to reduce weight. I do not know if these people will do it, but you can give them a call. :D

http://www.mygunroom.com/dvgunshop/vhbarrels.html
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline tlyne

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 271
Cutting Off Barrel
« Reply #2 on: March 14, 2005, 01:49:33 PM »
You would be better off to sale your barrel and order another one from the custom shop. If you cut off the 26" barrel you would void the warranty. All T/C items have a life time warranty. Also, your bore may not be in the center of the bore where you  make the cut. T/C bends there barrels to make them straight. Just my personal opinion.
Logged
Twyman

Offline RupertBear

  • Trade Count: (0)
  • Member
  • *
  • Posts: 37
Cutting Down Encore Barrel Length?
« Reply #3 on: March 14, 2005, 04:32:57 PM »
Gary Reeder custom guns makes 16" .300 WinMag barrels with muzzle breaks. Don't know if they will cut one down though.

http://www.reedercustomguns.com/index.html
Logged
Who Dares Wins

Offline rbjaw

  • Trade Count: (0)
  • Member
  • *
  • Posts: 38
Cutting Down Encore Barrel Length?
« Reply #4 on: March 15, 2005, 01:40:47 AM »
back in jan '04 one of the gun mags took a custom rifle and cut back barrel 2" at a time most accurate i believe was 22" at all distances 16" barrel was the same at 100yds as 22" barrel .
that said you will lose some weight off by cutting and having it recrowned
good shooting
jaw
 :P
Logged

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
Cutting Down Encore Barrel Length?
« Reply #5 on: March 15, 2005, 11:40:03 AM »
Just remember, the shorter you make it the harder it's going to thump you.  KN
Logged

Offline tcman

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 119
Cutting down barrel length
« Reply #6 on: March 21, 2005, 08:36:40 AM »
Hey Tlyne..... where do you get this opinion from you posted on the board:

    "T/C bends there barrels to make them straight. Just my personal opinion."
Logged

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
Cutting Down Encore Barrel Length?
« Reply #7 on: March 21, 2005, 11:38:44 AM »
I read a in depth article on the production of Savage rifles in a magazine a couple of years ago. One part of the proccess was staightening the barrels after they had been machined. I got the impression that it is pretty much standard practice to have to straighten them before they are mated to the actions.   KN
Logged
Pages: [1]   Go Up
« previous next »