« previous next »
Pages: [1]   Go Down

Author Topic: Wanted 32-20 loads with H-110 from Rile's Handloader article  (Read 496 times)

0 Members and 1 Guest are viewing this topic.

Offline GregP42

  • Global Moderator
  • Trade Count: (6)
  • A Real Regular
  • *****
  • Posts: 752
  • Gender: Male
Wanted 32-20 loads with H-110 from Rile's Handloader article
« on: March 21, 2005, 08:28:38 PM »
Help!
 
I was unpacking all my reloading things I had in storage at my dad's place now that I have the reloading bench set up at home, and my notes from that article are missing. (along with a bunch of other notes, but I will deal with them later.)
 
I was about to load up a bunch of 100gr Hornady HP, and some 115gr cast bullets and well.... I have bullets, lots of powder, empty cases and a Dan Wesson waiting to get dirty but no loading information... Any help would be great.
 
Thanks,
Greg
Logged
NRA Life Member
"Those who sacrifice essential liberty for temporary safety are not deserving of either liberty or safety."  - Ben Franklin, 1776
Vis Sis Mis!

Offline Jim 44-40

  • Trade Count: (0)
  • Member
  • *
  • Posts: 59
32-20 loads with H-110
« Reply #1 on: March 28, 2005, 09:55:37 AM »
(30,000 Cup) 118gr Cast Performance flatnose H-110 11.0grs  1847fps.  100gr SpeerJHP H-110 13.5grs  2,125fps. These loads shot from Marlin94 and Browning Model 53. Primer used Remington 7 1/2 .Loads from Rifle's Handloader,Dec 2001 # 214         Hope that gets you started
Logged

Offline Gun Runner

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1140
  • Gender: Male
Wanted 32-20 loads with H-110 from Rile's H
« Reply #2 on: March 28, 2005, 11:46:05 AM »
Greg and Jim, I have a Lyman 45th ed. and 41st ed loading books that both have loading data for the 32-20 both cast and jacketed, ifin you want will post them for ya. Nothing for the h-110, but got loads for unique, 2400, imr 4227, and imr 4759.

Gun Runner
Logged

Offline GregP42

  • Global Moderator
  • Trade Count: (6)
  • A Real Regular
  • *****
  • Posts: 752
  • Gender: Male
Wanted 32-20 loads with H-110 from Rile's H
« Reply #3 on: March 28, 2005, 02:08:44 PM »
Jim,
Many thanks, I have been looking all over the house and still haven't found that article. Now to get loading some rounds for my Dan Wesson!

Greg
Logged
NRA Life Member
"Those who sacrifice essential liberty for temporary safety are not deserving of either liberty or safety."  - Ben Franklin, 1776
Vis Sis Mis!

Offline GregP42

  • Global Moderator
  • Trade Count: (6)
  • A Real Regular
  • *****
  • Posts: 752
  • Gender: Male
Wanted 32-20 loads with H-110 from Rile's H
« Reply #4 on: March 28, 2005, 02:11:41 PM »
Quote from: Gun Runner
Greg and Jim, I have a Lyman 45th ed. and 41st ed loading books that both have loading data for the 32-20 both cast and jacketed, ifin you want will post them for ya. Nothing for the h-110, but got loads for unique, 2400, imr 4227, and imr 4759.

Gun Runner


Gun Runner,

Thanks for the offer, I have almost 6 pounds of H-110 left and I only use it in the .41 mag and the .32-20, I use IMR-4227 when I am shooting 147g bullets in my .32-20 single shot pistol.

Greg
Logged
NRA Life Member
"Those who sacrifice essential liberty for temporary safety are not deserving of either liberty or safety."  - Ben Franklin, 1776
Vis Sis Mis!

Online Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18259
Re: 32-20 loads with H-110
« Reply #5 on: March 29, 2005, 12:34:50 AM »
either there chrono is off or both of mine are i get simular velocities out of my rilfe with 115s and 14 grains of 110 and with 16 grains and the 100 grain bullets.
Quote from: Jim 44-40
(30,000 Cup) 118gr Cast Performance flatnose H-110 11.0grs  1847fps.  100gr SpeerJHP H-110 13.5grs  2,125fps. These loads shot from Marlin94 and Browning Model 53. Primer used Remington 7 1/2 .Loads from Rifle's Handloader,Dec 2001 # 214         Hope that gets you started
Logged
blue lives matter
Pages: [1]   Go Up
« previous next »