« previous next »
Pages: [1]   Go Down

Author Topic: Burris Signature versus Talley One-piece Rings/Bases  (Read 463 times)

0 Members and 1 Guest are viewing this topic.

Offline june6th1944

  • Trade Count: (0)
  • Member
  • *
  • Posts: 90
  • Gender: Male
Burris Signature versus Talley One-piece Rings/Bases
« on: April 12, 2005, 10:14:57 AM »
I need to mount a new Burris scope.  I am looking at Burris Signature Rings or a set of Talley Lightweight One-piece mount/ring.  The Talleys are actually 2 pieces, one for the front and one for the back, but the ring and base are one integral piece.  If I went with the Talley, I'd probably need to lap the rings and not so with the Burris.

Comments?
Logged

Offline DHB

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Burris Signature versus Talley One-piece Ri
« Reply #1 on: April 13, 2005, 05:58:02 AM »
My preference is Leupold bases and Signature rings. I tried the Talleys and if you are counting ounces then they are the way but the set I had were very tight on the scope at the parting line and marked up the scope tube. Not a bunch but a little. The Burris is great in that you can use offset inserts to get boresighted without touching the scopes adjustments. You save right at 2.5 oz with the Talley's.
Dave
Logged
Pages: [1]   Go Up
« previous next »