Author Topic: Vertical stringing/accuary problems (Read 556 times)

dbl bbl · « **on:** April 16, 2005, 05:00:17 PM »

I thought I had the vert. stringing problems fixed by floating the forend and allowing only the screw lugs to touch the barrel of my encore. Now I'm starting to get it again!

Any ideas on how to fix the problem?

sab-

scienceguy · « **Reply #1 on:** April 17, 2005, 05:51:55 AM »

How did you float the barrel? If you use rubber washers on the screws they eventually flatten out, distort, and allow contact with the forend and barrel again. I switched over to stainless washers and no longer had the problem of stringing.

skb2706 · « **Reply #2 on:** April 17, 2005, 07:00:19 AM »

Is your scope slipping thru the rings? Handloaded ammo or store bought ?

MickinColo · « **Reply #3 on:** April 18, 2005, 02:17:19 PM »

John Barsness has an article in the May 2005 Rifle magazine under Optics that may be of some interest to you.
:-)

dbl bbl · « **Reply #4 on:** April 18, 2005, 05:14:23 PM »

Shot some more loads, what I thought was stringing problems, wasn't! Just a really bad handload. My good loads shot well....just had to make some more.

After several years of handloading, it still amazes me how different (and bad) some trials shoot.

Thanks for the help,
sab-