« previous next »
Pages: [1]   Go Down

Author Topic: model 29  (Read 449 times)

0 Members and 1 Guest are viewing this topic.

Offline dabond

  • Trade Count: (0)
  • Posts: 1
model 29
« on: July 31, 2005, 03:24:26 PM »
Hello, first post but have been lurking.  I need some help on a model 29 pump.  It came to me totally unassembled, even the barrel had been pulled.  Well I cleaned everything up and reassembled most of it, checked headspace, had to cut the barrel back and rechamber, chucked a round into it and it shot.  Now my problem.  I can't figure out how the magazine goes together.  It looks like all the parts are there.  Does anyone have an assembly diagram or know where I could get one ?
TIA
Dennis
Logged

Offline Nightrain52

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 814
model 29
« Reply #1 on: August 01, 2005, 02:14:12 PM »
Check with-egunparts-They should have a drawing you can bring up online. :D
Logged
FREEDOM IS WORTH FIGHTING FOR-ARE YOU WILLING TO DIE FOR IT--------IT'S HARD TO SOAR LIKE AN EAGLE WHEN YOU ARE SURROUNDED BY TURKEYS

Offline Emmett Dunham

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Magizne instlall
« Reply #2 on: November 13, 2005, 03:05:50 PM »
I'll be receiving a Model 18 in the next two weeks and will have to remove the magizne, the 29 is has some basic differences but the magazine is the same.  If you email I will give you a discreption of the reinstallation. How did you screw the barrel into the receiver of your rifle.



Emmett
emmetted@netscape.net

P.S. Numrich does not have instruction for break down only exploded views of the rifles they carry parts for, usless they sell a book that provide instructions on your model.
Logged
Pages: [1]   Go Up
« previous next »