« previous next »
Pages: [1]   Go Down

Author Topic: SCRATCHES OR MAR IN FINISH  (Read 643 times)

0 Members and 1 Guest are viewing this topic.

Offline #1shooter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 14
SCRATCHES OR MAR IN FINISH
« on: May 19, 2005, 05:55:29 PM »
hi i am a newbie and want to say hello to everyone, I HAVE A RUGER #1 STAINLESS AND WHILE RIDING IN MY TRUCK THE RIFLE DURING A TURN THE RIFLE SLID ACROSS THE PLASTIC CONSOLE LOCATED BETWEEN THE BUCKET SEATS CREATING SOME SCRATCHES OR REALLY MORE OF A MAR TO THE RECIEVER ON THE LEFT SIDE,WHAT CAN I DO TO RESTORE THE HIGHLY POLISHED SURFACE/
/?THANKS,CRAIG
Logged

Offline John Traveler1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
marred stainless finish
« Reply #1 on: May 19, 2005, 06:28:27 PM »
Touching up a marred stainless finish is easy. This applies to the satin "brushed finish" models.  If yours is the dull gray vapor blasted finish, you will need compressed air and bead blasting to touch up the finish.

Use 400 or 600 grit wet-or-dry abrasive backed up with a small flat piece of wood.  I use a popsicle stick.  Just rub at the scratch until it blends in with the background.
Logged

Offline #1shooter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 14
scratches
« Reply #2 on: May 19, 2005, 06:36:25 PM »
hi,the finish on the rifle is highly polished on the reciever,thanks for the info,craig
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
SCRATCHES OR MAR IN FINISH
« Reply #3 on: May 20, 2005, 06:53:46 AM »
Personally I would not bother with it unless you want a good value for resale. I have a Shiloh Sharps and I have several battles scars on it.  I call it victory marks.  :D  Sure I like to keep my guns a good looking as I can, but stuff happens and I just get use to it.  :-D
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline #1shooter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 14
re mars
« Reply #4 on: May 20, 2005, 10:57:36 AM »
Hi ,Itried fine steel wool first but that did not work so I used a coars wool designed for stripping and then followed that with the fine grade once again and that did the trick !thanks,CRAIG :-)  :-)
Logged
Pages: [1]   Go Up
« previous next »