« previous next »
Pages: [1]   Go Down

Author Topic: how do the factory ss-26" 22-250 barrels shoot?  (Read 952 times)

0 Members and 1 Guest are viewing this topic.

Offline reelhook

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 157
how do the factory ss-26" 22-250 barrels shoot?
« on: February 15, 2003, 10:24:47 AM »
I am trying to purchase a 20+ inch ss 22-250 barrel and wonder how the factory barrels shoot? Want a heavy barrel but will probaple cut it. Any thoughts? I am also interested in a 243 also
Logged

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
how do the factory ss-26" 22-250 barre
« Reply #1 on: February 15, 2003, 01:22:17 PM »
My facctory 26" hvy barrel shoots 3/4" consistently and better when I'm really in good form.  KN
Logged

Offline RonF

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 418
how do the factory ss-26" 22-250 barre
« Reply #2 on: February 16, 2003, 01:58:42 AM »
Same for mine.

RonF
Logged

Offline BeverlyHillbilly

  • Trade Count: (4)
  • Member
  • *
  • Posts: 64
Re: how do the factory ss-26" 22-250 barrels shoot?
« Reply #3 on: February 16, 2003, 06:12:14 AM »
I get 200 yard groups around 1.5" with the factory loads (best has been the Hornady factory loaded 55 grain VMax).  I just got my barrel late last summer and handloads were getting in the ~ 1" range at 200 yards, but haven't tried many variations yet.  I know it will do better since I haven't hardly tried load variations yet.  

I have the 26" heavy 223 barrel also, and it will shoot 3/4 at 200 yards.  I found that the bullet weights from 50-55 have been best in it when seated out to almost touch the lands (powder was BLC-2).  I don't remember my charge weight, still have my notes packed away.

As for a 243, I really don't know.  I am getting a custom later this year in 26", cannot wait.

Rich C.
Logged

Offline Okiehunter440

  • Trade Count: (0)
  • Member
  • *
  • Posts: 13
how do the factory ss-26" 22-250 barre
« Reply #4 on: February 16, 2003, 04:01:33 PM »
When I purchased my Encore it was with the 22.250.  I could not get factory ammo to shoot under 2.25" on my best day.  I ended up sending it back to TC and it came back a shooter.  Said they re-crowned it and lapped the barrel.  It shot .5-.75" groups with Rem. factory 55gr.  I'm now working up a load for it and it looks very promising.  The first loads that I have tried shot .75 but I feel that when I hit the 'sweet spot' it will do better.  Additionally, I have a custom barrel from VV (257 wby) and I'm really having difficulty getting it to perform.  1.25 being the average although I continue to try different loads, etc.  If I had it to do over I would have gone with factory but just had to scratch that itch.  Good luck.
Logged
Most men stumble over the truth but pick themselves up and continue as if nothing happened.

Offline Leon Garfield

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
how do the factory ss-26" 22-250 barre
« Reply #5 on: February 18, 2003, 01:12:22 PM »
I have one and I must say I love it. I know it is not no VV but let me tell you with a little load work and case prep I have a FACTORY barrel that will shoot a nice 7/16 at 100 yds....
I also have a 223 in the factory 24" that is a little better it gets just over 3/8" at 100 yds...
I have 4 barrels and the worst one shoots 3/4" group
I also have a 45 cal muzzel loader which I am getting about 1" to `1.5" at 100 yds
So save yourself a little money and buy the factory if it is not right Thompson dispite all people say will stand behind it all the way........
Logged
Pages: [1]   Go Up
« previous next »