Author Topic: CZ SCOUT EJECTION PROBLEMS (Read 411 times)

litig8or · « **on:** June 02, 2005, 02:38:40 AM »

I have recently purchased a CZ Scout for my son. After several trips to the range, we have noticed, and confirmed, that the rifle will not eject Wolf, SK, RWS, or Eley. It will eject Winchester T-22, American Eagle, and Remington Target.

Has anyone had a similar experience or have any thoughts on this matter?

Thanks in advance for your response.

litig8or

bgjohn · « **Reply #1 on:** June 02, 2005, 04:13:23 AM »

Clean the chamber.
JM

litig8or · « **Reply #2 on:** June 02, 2005, 05:19:01 AM »

Cleaned, cleaned and cleaned again!!!

DWARREN123 · « **Reply #3 on:** June 05, 2005, 03:20:27 AM »

Are these fired or unfired rounds, if unfired it's the tight chamber if fired check the extractor and cartridge support for burrs or shape.
Would also give CZ a call.

WWW.CZ-USA.COM

moontroll · « **Reply #4 on:** June 05, 2005, 06:10:20 AM »

I have found on my cz the two little clips on the bolt that grabs the shell are bad about powder buildup.I take a piece of dental floss to get all the crud out,then it will work better.Clean,clean clean.If its the chamber I take a patch holder put some steel wool on it and polish it a little(carefully).