Author Topic: what kind of....  (Read 804 times)

0 Members and 1 Guest are viewing this topic.

Offline sageman

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 117
what kind of....
« on: May 15, 2005, 01:29:09 PM »
What kind of lever action rifle would you sugjest in 38 specal

Offline Cheyenne Ranger

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1111
what kind of....
« Reply #1 on: May 16, 2005, 02:10:12 AM »
Both Marlin and Puma have 38 sp lever rifles.  Pumas are cheaper but rougher.  Marlins are more expensive and usually can benefit from some work on them, too.

Marlins side eject, Pumas and clones go straight up.  

That being said it boils down to what you like and what you can afford.  Might want to go to a match and try some--Cowboys are famous for letting others have a try with their firearms.

ÇR
SASS 48747L
RO II
Thunder River Renegades
SBSS #1170--OGB

Offline Prof. Fuller Bullspit

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 199
what kind of....
« Reply #2 on: May 16, 2005, 08:51:18 AM »
I would recommend the Marlin. It is easier to take apart (and more importantly, put back together). Therefore it is easier to slick up and easier to clean.

Offline Tres Equis

  • Trade Count: (0)
  • Member
  • *
  • Posts: 13
what kind of....
« Reply #3 on: May 29, 2005, 04:10:40 PM »
Yup.  The Marlin is definately hard to beat.  And it's a heckofalot cheaper than a 66 or 73.
I don't think it's nice, you laughin'. You see, my mule don't like people laughing. He gets the crazy idea you're laughin' at him. Now if you apologize, like I know you're going to, I might convince him that you really didn't mean it.

Offline Cheyenne Ranger

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1111
what kind of....
« Reply #4 on: June 01, 2005, 01:17:23 PM »
One thing to remember about Marlins is to keep the screws tight.  Good idea to check them before and after a match.  Don't have to torque them down super tight but they do work loose after a couple of hundred rounds.

I also up the safety eliminator thingy in both of mine.  It looks like a screw on one side and a pin on the other.  Removes the safety all together so you don't accidently put it on as you go to fire.  Course you're removing a safety feature so you have to procede at your own risk.

ÇR
SASS 48747L
RO II
Thunder River Renegades
SBSS #1170--OGB

Offline Cheyenne Ranger

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1111
Marlin Cross-Bolt Safety Replacement Kit
« Reply #5 on: June 01, 2005, 01:52:24 PM »
here is a link to the replacement, pictures and all:

http://www.leverguns.com/articles/taylor/crossbolt_safety.htm

ÇR
SASS 48747L
RO II
Thunder River Renegades
SBSS #1170--OGB

Offline RB Rooson

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 330
  • Gender: Male
  • "If you come for mine, be sure to bring yours!"
    • http://www.ptca.00go.com
what kind of....
« Reply #6 on: June 05, 2005, 05:27:30 PM »
Cheyenne Ranger hit it right on the head!!  Marlin and Puma.....have both, but the Marlin is my preferred Match rifle.
SASS #16974 - Duelist
SBSS # 1195 (O.G.B.) LXXIX
BOLD # 352

"Everyday I pray to be the man that my dog thinks I am!"

Offline Otto N. Sure

  • Trade Count: (0)
  • Posts: 4
what kind of....
« Reply #7 on: June 12, 2005, 08:20:21 PM »
Howdy!

My first CAS rifle was a Rossi .38/.357 and it's still a tack driver.  The compadres recommending Puma's are really referin' to a particular Rossi '92 imported by LSI.

If'n ya like the '92 configuration I'd recommend that ya look at EMF or Cimarron.  Both have 'em much more like what was available back in the day than the LSI's.

As fer Marlin's well all I can say is they ain't Winchesters.

Otto N. Sure
ALWAYS BEEN A COWBOY!

SASS-LIFE; NRA-LIFE
Member:  Clark County Sport Shooting Park Advisory Committee