Author Topic: jamming (Read 763 times)

alexw · « **on:** November 05, 2005, 07:02:57 AM »

Does any one know why my llama 9mm omni is jamming? It has been cleaned.It jams when the empty caseing is being ejected.sometomes it will stay stuck in the chamber. can any one help?

PA-Joe · « **Reply #1 on:** November 05, 2005, 10:47:21 AM »

What type of ammo, some HPs will not work. What type of jam? Failure to feed, failure to eject, bullet getting stuck going in? It could be a weak mag spring or recoil spring? Take a look at the feed ramp. It may have to be polished. Are these reloads - check the COL.

Savage · « **Reply #2 on:** November 09, 2005, 11:15:39 AM »

alexw,
Not to bash your pistol, but Llama quality is a bit spotty. If this is a new pistol and it jams right out of the box, it needs to be returned to the dealer. If it has been working ok since you bought it, and suddenly started having malfunctions, it might be fixable. But, more information on the type of malfunction would be necessary. From your post I would assume that you might not be comfortable with fixing it yourself. Perhaps you know someone that can help you with your gun.
Good Luck,
Savage

mt3030 · « **Reply #3 on:** December 16, 2005, 01:25:54 PM »

You stated it had been cleaned, but never mentioned relubing it. Semis do not like to be dry. Did you properly lub after cleaning? If the rails are dry, this can prevent proper slide movement, ejection and feeding.

Wally

corbanzo · « **Reply #4 on:** January 09, 2006, 09:00:30 AM »

I will have to agree with savage, llama's are pretty cheap... You should return it, and find something with a little higher quality. Otherwise, you have a 9mm paperweight.