Author Topic: Q on fitting Burris Sig Zee rings (Read 282 times)

bang_off · « **on:** August 15, 2005, 06:53:21 PM »

Hi all,

Setting up the 204 Handi for it's first outing and have a question about the Burris ring inserts. There are four inserts. 2 have a "0" on them and 2 have a "0", that is a zero skewed on a slight angle.

My Q is, do I set it up with both straight ones together and both skewed ones together? or mix and match? The instructions don't really spell much out.

TIA! :grin:

http://www.graybeardoutdoors.com/phpbb2/album_pic.php?pic_id=963

quickdtoo · « **Reply #1 on:** August 15, 2005, 07:21:54 PM »

As far as I know, the 0 inserts are 0 inserts, they probably just changed the printing on em. The offset inserts have + or - 5, 10 and 20 marked on them. I would email Burris for clarification, just in case....

customerservice@burrisoptics.com

Graybeard · « **Reply #2 on:** August 16, 2005, 04:38:24 AM »

Zero's are zero's. There are four sizes. Zero , five, ten and 20. All zeros are the same. The other sizes have both a plus and minus.

bang_off · « **Reply #3 on:** August 16, 2005, 12:22:14 PM »

Thanks guys,

that makes sense. :grin: