Author Topic: STUCK CASE PROBLEM SOLVED (Read 472 times)

lonewolf5347 · « **on:** August 22, 2005, 08:19:37 AM »

Went back out to the range to-day and found the problem why the 06 case would get stuck in the chamber.(INCREASE POWDER CHARGE)
I was still under the max: load with IMR 3031 45.0 grains but it seem a little to much powder .
I went to my old load of 44.5 grains and the problem was gone ,the above target is at the 100 yard 3 shots a little under 7/8 "

:-D

quickdtoo · « **Reply #1 on:** August 22, 2005, 08:39:25 AM »

Another happy ending story!!!

De41mag · « **Reply #2 on:** August 22, 2005, 12:56:06 PM »

:eek: :shock: :shock:

Nice group Lonewolf. :wink:

Dennis

handirifle · « **Reply #3 on:** August 22, 2005, 01:39:53 PM »

Boy, after seeing Mac's and yours group I hope I don't regret not getting an '06 barrel.

Nice shooting. The Handi's seem to develope issues with top end loads in a lot of calibers.

tommy_tsunami · « **Reply #4 on:** August 24, 2005, 10:21:29 AM »

That's nice shootin' cowboy! :eek:

Some of that's from the gun, of course, but it looks like you're just a good shot as well. Nice job!