Author Topic: Weaver T24 - not seen in Oz  (Read 1106 times)

0 Members and 2 Guests are viewing this topic.

Offline fwt1712

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Weaver T24 - not seen in Oz
« on: October 26, 2005, 02:25:01 PM »
These are virtually unseen in Australian shops. Where would the best place to start looking in the US be - but they must ship to Oz. Thanks Nigel.

ps what is their close-focus range. Without a range in our state I am forced to do a lot of dry-fire at scaled targets inside.
nlg

Offline eroyd

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 300
Weaver T24 - not seen in Oz
« Reply #1 on: October 26, 2005, 02:59:00 PM »
Weaver Target scopes are rarely seen in Canada as well. There's to many regulations regarding exporting scopes from the US, especially those pertained to be "military". No ones 100% sure what's legal one day to the next so most dealers won't ship anything.

Dealing with warranty issues across borders has also become a PIA. Being there is a Leupold, Bushnell warranty place in Canada most stick with those.

Personally I'd really like a lightweight T16. (anyone got one?) The 24X is too much X for me.

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Weaver T24 - not seen in Oz
« Reply #2 on: October 26, 2005, 03:50:10 PM »
I'd check with one of the really big dealers like Midway. www.midwayusa.com
and see if they can export those. I know anything with a mil dot retical is forbidden, but not sure about target scopes. BTW, I just put one on my prairie dog gun and I love it! It was bought for the HP hunter I'm putting together, but I think I'll have to get another one now!
They will focus down to 50 feet, work fine across the shop.
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline ajj

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 500
Weaver T24 - not seen in Oz
« Reply #3 on: October 27, 2005, 03:38:56 AM »
How are users finding the tracking to be on the new T-24 scopes? I bought an "old" one shortly after they were discontinued and it has stood up perfectly to five years of heavy use on a smallbore rifle. I re-read Dan Theodore's tracking test report on ShootingPaul's website and see that he tested a T-36 but I'm not sure whether it was the "new" or the "old." I'll be in the market soon, choosing between new Weaver and Sightron.

Offline Gringo Grizzly

  • Trade Count: (0)
  • Member
  • *
  • Posts: 43
Weaver T24 - not seen in Oz
« Reply #4 on: October 27, 2005, 04:26:06 AM »
Eroyd,
I recently purchased one of the lightweight T-16s from Blamthewind,
it's light indeed and I needed it to get in under the 9 lb rule for HPHR's with my Nesika -stocked M700.

So far, it's tracked well and optics are fine.
He had a few of these and at least one other contributor to these pages bought one as well.
Maybe he has another one.
Gringo

Offline RamSlammer

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
Weaver T24 - not seen in Oz
« Reply #5 on: October 27, 2005, 11:02:53 AM »
G'Day All
             I got the other T16 off blamethewind, fwt1712 has used it and I think that's what has finally pushed him to a Weaver. The T24 would be better for him as he has a LOT less wobble than me. I like the 3/4 dot that much that I took a EFR off my FWB P70FT and put the T16 on( air rifle range is only 450metres from home).
Juddy

Offline cslcAl

  • Trade Count: (0)
  • Member
  • *
  • Posts: 78
  • Gender: Male
Weaver T24 - not seen in Oz
« Reply #6 on: October 27, 2005, 01:48:54 PM »
I have three T-24's. Two of the "old" discontinued ones on SB rifles and a new model on my 2002CA Anschutz. I don't think you can buy a better scope today for the money. All of mine track perfectly and the parellax adjustments are right on the money. They will focus down to 50 ft. with no problem, and if you need to shoot 10 meters you can just simply tape a 50 ft. adapter on with electrical tape. (works for me).

Al

Offline muzza64

  • Trade Count: (0)
  • Posts: 1
Weaver T24 - not seen in Oz
« Reply #7 on: October 27, 2005, 04:30:21 PM »

Offline PJ Smyth

  • Trade Count: (0)
  • Member
  • *
  • Posts: 27
Your scope Choice
« Reply #8 on: November 04, 2005, 11:09:41 AM »
Nigle Contact me Re an Anschutz Air Rifle, I can't seem to send you PM psmyth@speedlink.com.au  regards Phill
 The Scope I had on the  new 7 MM BR that you shot, was a Premeier( 6.5 to 20) Boosted to 18 to 40 Vari X III 1/2 min Dot it focuses down to 10 m- same on my Feinwerkbau P70 Air ony 3/8 dot I like the 1/2 in better  your eye follows the dot. Regards phill