Author Topic: lyman moulds (Read 636 times)

dodd3 · « **on:** September 03, 2005, 06:00:35 AM »

do rcbs handles fit lyman moulds. i have two rcbs moulds and seven lee moulds, i am going to get a lyman mould and i don't wont to get lyman handles if i can use the rcbs handles thanks.
bernie :-)

John Traveler1 · « **Reply #1 on:** September 03, 2005, 11:13:06 AM »

RCBS bought out the Ohaus line of bullet molds and products and continued making them under the RCBS label.

The last time I checked (it's been several years), the OHAUS/RCBS handles don't fit the Lyman mold blocks. The rectangular slot is a different size and shape, and the screw holes are located differently.

HTH
John

ron haralson · « **Reply #2 on:** September 07, 2005, 06:32:36 AM »

Lee 6 - cavity handles work and are noticeably cheaper.

captainkirk · « **Reply #3 on:** September 07, 2005, 12:15:59 PM »

My RCBS handles fit just fine on my lyman mould. The handles came off of a two cavity RCBS pistol mould (44 cal) somewhere in the 15 yr + range and fit just fine on a new production Lyman single cavity 458 caliber mould. No fitting whatsoever. I just put the screws in and went to castin'. Good luck, your mileage may vary.

PS I posted this question before for the same reason and got positive responses.

captainkirk

Lloyd Smale · « **Reply #4 on:** September 08, 2005, 11:55:51 PM »

yes they will but lymans wont fit rcbs blocks