www.GBOReloaded.com
Home
Help
Articles
Classifieds
Login
Register
Graybeard Outdoors (GBO Reloaded)
»
Ammo/Hand Loading Forums
»
Hand Loading for Rifles and Handguns
»
IMR 4064 best for .308?
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: IMR 4064 best for .308? (Read 1191 times)
0 Members and 1 Guest are viewing this topic.
lostsniper308
Trade Count:
(
0
)
A Real Regular
Posts: 790
Gender:
old beaten up Martini-Henry .303 we found.
IMR 4064 best for .308?
«
on:
August 29, 2005, 12:01:25 PM »
The title says what i've heard that IMR 4064 is the best powder for .308 Win. What do you all havta say?
Logged
B Co. 1-22Inf 1st BCT 4th Infantry Division
OIF 08-09 out of the army now
Blackhawk44
Trade Count:
(
0
)
A Real Regular
Posts: 981
IMR 4064 best for .308?
«
Reply #1 on:
August 29, 2005, 01:27:02 PM »
While in your particular rifle, Varget or ReLoder 15 may, or may not, be more accurate or you might need a slightly more temperature stable powder, IMR 4064 is never a bad choice for the .308.
Logged
jh45gun
Trade Count:
(
0
)
Senior Member
Posts: 4992
IMR 4064 best for .308?
«
Reply #2 on:
August 29, 2005, 09:39:46 PM »
The 308 is one of those rounds that is not very finicky your powder choice is a good one according to the Hornady book and also W748. IMR 3031 is not a bad choice either.
Logged
Said I never had much use for one, never said I didn't know how to use it.
ricciardelli
Trade Count:
(
0
)
Senior Member
Posts: 1004
Gender:
IMR 4064 best for .308?
«
Reply #3 on:
August 29, 2005, 10:36:08 PM »
Depends on the bullet...the rifle...the reloader.
Logged
http://stevespages.com/phpbb/
mag41vance
Trade Count:
(
0
)
A Real Regular
Posts: 618
IMR 4064 best for .308?
«
Reply #4 on:
August 30, 2005, 11:58:53 AM »
IMR 4064 can really heat up the bore. If you have extended shooting sessions, w748 shoots cooler.
Logged
no x now!
canonF-1
Trade Count:
(
0
)
Member
Posts: 22
IMR 4064 best for .308?
«
Reply #5 on:
September 04, 2005, 01:14:33 PM »
I have loaded 4064 in a number of rounds over the years including the 308 Win. It worked like clockwork but I have long since gone to other powders.
I have had better luck in Idaho where the Temps can range a 100 deg, with powders like H4895 (Varget I haven't tried but it should work).
One of my favorite 308 powders is IMR 4320. While it is more Temp sensitive than some newer ones, it has never let me down under a wide temp rage. I like 4320 as it meters nearly like a ball powder.
I still have some 4064 in the powder safe somewhere though it mostly just sits there and ages. I should shoot it up.
F-1
Logged
Zeke Menuar
Trade Count:
(
0
)
Avid Poster
Posts: 237
IMR 4064 best for .308?
«
Reply #6 on:
September 04, 2005, 02:41:26 PM »
I use RL-15 in 308. It works very well in other medium capacity cases such as 303 British and 300 Savage.
ZM
Logged
Official Guardian of the Arsenal of Paranoia
cal sibley
Trade Count:
(
0
)
Contributor
Posts: 319
IMR 4064 best for .308?
«
Reply #7 on:
September 11, 2005, 10:48:45 AM »
IMR4064 performs very well in my .308Win. It's a Browning Micro-medallion with a short 20", thin barrel with a 1 in 12" barrel. I shoot mostly 125 and 150gr. bullets for my best accuracy and find IMR4064 and IMR4895 both give good accuracy. Just one mans opinion. Best wishes.
Cal - Montreal
Logged
RIP Cal you are missed by many.
Print
Pages: [
1
]
Go Up
« previous
next »
Graybeard Outdoors (GBO Reloaded)
»
Ammo/Hand Loading Forums
»
Hand Loading for Rifles and Handguns
»
IMR 4064 best for .308?