« previous next »
Pages: [1]   Go Down

Author Topic: Cast alloy  (Read 1248 times)

0 Members and 1 Guest are viewing this topic.

Offline RBak

  • Trade Count: (0)
  • Member
  • *
  • Posts: 28
Cast alloy
« on: December 05, 2002, 05:45:41 PM »
Huh? Didn't accomplish much did I?  If W/W have that much lead, or that "little" other stuff what "Mix' do I really have?
Logged
Vegetarian........ Old indian word for lousy shot.

Offline Aladin

  • Trade Count: (0)
  • Member
  • *
  • Posts: 82
Re: Cast alloy
« Reply #1 on: December 06, 2002, 06:23:43 AM »
Glenn your alloy is in the area of 6.5 BHN--- 8 units of lead [5 bhn ea] and 2 units of ww alloy [24 figuring an aged hardness of 12 bhn] as cast [64 divided by the 10 units]. Thing is-- your compressing that alloy 6 thou which I'd think has to help some. Tin/lead alloys also age SOFTEN to some degree-- ww alloys age HARDEN if their as cast.

What works works.. just run with it!
Logged
Aladin

"that's my story and I'm stick'n to it"

Offline RBak

  • Trade Count: (0)
  • Member
  • *
  • Posts: 28
Re: Cast alloy
« Reply #2 on: December 09, 2002, 10:41:53 AM »
Quote
Glenn your alloy is in the area of 6.5 BHN--- 8 units of lead [5 bhn ea] and 2 units of ww alloy [24 figuring an aged hardness of 12 bhn] as cast [64 divided by the 10 units]. Thing is-- your compressing that alloy 6 thou which I'd think has to help some. Tin/lead alloys also age SOFTEN to some degree-- ww alloys age HARDEN if their as cast.


 :D Hi Aladin, It appears this is nothing more than a "near" Pure Lead Mix, with just a bit of Tin from the W/W that aids in the pouring.  It is truly amazing what that "tiny-bit" of Tin does in the final formation of the bullet. It might be said that Tin determines the correctness, or fit, of the pour to the mold.....good stuff, indeed!  It's very unfortunate for us casters that it is so pricey.
Russ
Logged
Vegetarian........ Old indian word for lousy shot.
Pages: [1]   Go Up
« previous next »