« previous next »
Pages: [1]   Go Down

Author Topic: 10/22 Trigger  (Read 706 times)

0 Members and 1 Guest are viewing this topic.

Offline 257Robt

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 250
10/22 Trigger
« on: September 26, 2005, 04:04:45 PM »
The trigger on my 10/22 is fairly heavy which makes accurate shooting difficult. Are there any suggestions for a simple fix to this problem.
Logged
Expect it when you least expect it

Offline TC Shooter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 157
10/22 Trigger
« Reply #1 on: September 27, 2005, 06:03:17 AM »
Some shooters install an aftermarket hammer which reduces the pull. There are literally tons of aftermarket components for upgrading the 10/22.
Logged

Offline mag shooter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 46
10/22 Trigger
« Reply #2 on: September 27, 2005, 10:58:24 AM »
Logged
Speak the TRUTH or say nothing at all!!!

Offline BlkHawk73

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1501
  • Gender: Male
10/22 Trigger
« Reply #3 on: September 27, 2005, 11:23:48 AM »
I've run the gamut from a simple spring kit install myself to the full blown JARD assembly.  For the money, send your assembly to TT Shooter www.ttshooter.com and it'll come back with a awesome feel to it.  After the cost of the good kits for a DIY for a few more dollars he'll do it all for you and more.
Logged
"Never Surrender, Just Carry On."  - G.S.

Offline goodshot

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 986
10/22 Trigger
« Reply #4 on: September 27, 2005, 05:05:48 PM »
A local smith offers a slicked up hammer for $20 at our local shows, I had 2 of mine done, one would not trip with all the weight he had brought with him to test trigger pull, the new one is around 3.3 lbs. He doesn't like to go below 3 pounds.
He has a box of triggers that he has worked on , he measures , swaps out and measures again to see the out come until he gets it down, my first rifle was one try, the second was two tries to get it down. I looked at the 2 sites offered here and it looks like the do a lot of fine work to really end up with a super trigger but I am happy with mine now. Best wishes, hope this helps.
Logged

Offline Simple Man

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 301
10/22 Trigger
« Reply #5 on: October 07, 2005, 06:40:06 AM »
If you will keep your eye on the bargain bin on Volquartsen's website you can usually pick up a target hammer for around $20 and that will really smoothe out the trigger for you.

https://www.volquartsen.com/vc/pages/public/home.jsp

 :D
Logged
Pages: [1]   Go Up
« previous next »