« previous next »
Pages: [1]   Go Down

Author Topic: Loads for 405 gr. lee cast in 45/70  (Read 1735 times)

0 Members and 1 Guest are viewing this topic.

Offline missed_shot

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 166
Loads for 405 gr. lee cast in 45/70
« on: August 26, 2005, 10:41:55 AM »
I just cast about 50 405 gr. hollow base 45/70 bullets from Lee. Wow - that's a hunk of lead.  :eek:   Does anyone have any good loads for this bullet since it isn't gas checked. I plan to use it in my B.C.. Thanks
Logged
DONUTS - IS THERE ANYTHING THEY CAN'T DO ??- HOMER SIMPSON

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Loads for 405 gr. lee cast in 45/70
« Reply #1 on: August 26, 2005, 05:50:53 PM »
As much Fg black powder as you can get into the case under the bullet. That's what it was made for, after all.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline Leftoverdj

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1398
Loads for 405 gr. lee cast in 45/70
« Reply #2 on: August 27, 2005, 01:04:50 PM »
13 grains of Unigue. 27 grains of 5744. 30 grains of either of the 4198s.  I leave the bullets as cast and either use Liquid Alox or pan lube them.
Logged
It is the duty of the good citizen to love his country and hate his gubmint.

Offline kjg

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
Loads for 405 gr. lee cast in 45/70
« Reply #3 on: September 28, 2005, 04:36:05 AM »
i'm wondering why the duplex load ,I have heard of others doing such , but 3031 2400 and 4198 works good so why duplex ?  kjg
Logged

Offline Leftoverdj

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1398
Loads for 405 gr. lee cast in 45/70
« Reply #4 on: September 29, 2005, 05:53:14 AM »
No duplex suggested. Those are separate loads.
Logged
It is the duty of the good citizen to love his country and hate his gubmint.

Offline JBMauser

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 391
Loads for 405 gr. lee cast in 45/70
« Reply #5 on: September 29, 2005, 05:20:47 PM »
I have had good results with 24gr of 4759 also 15.5gr of Unique. Best of luck.  JB
Logged

Offline ron haralson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
Lee 457 405 loads
« Reply #6 on: September 30, 2005, 05:45:27 AM »
I've had best results with 24 - 25 gr 2400 sized in a Lee sizer, seated to the first driving band, hand lubed with good quality machine grease, then seated to finished depth and wiped clean. I use Canadian Tire moly grease, but the differences are small.

Ron
Logged

Offline powderman

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 32823
  • Gender: Male
Loads for 405 gr. lee cast in 45/70
« Reply #7 on: October 02, 2005, 03:39:54 PM »
I use 43 gr of RX7 with the LEE 405 grhp. The hp is just for looks, more like a dimple. This load was recommended to me by the old Hercules pwdr co many years ago. It has killed our deer for many years now. POWDERMAN.  :D  :D
Logged
Mr. Charles Glenn “Charlie” Nelson, age 73, of Payneville, KY passed away Thursday, October 14, 2021 at his residence. RIP Charlie, we'll will all miss you. GB

Only half the people leave an abortion clinic alive.
http://www.youtube.com/watch?v=MAiOEV0v2RM
What part of ILLEGAL is so hard to understand???
I learned everything about islam I need to know on 9-11-01.
http://www.thereligionofpeace.com/
http://www.youtube.com/watch?v=TDqmy1cSqgo
http://www.youtube.com/watch?v=_u9kieqGppE&feature=related
http://www.illinois.gov/gov/contactthegovernor.cfm

Offline kjg

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
Loads for 405 gr. lee cast in 45/70
« Reply #8 on: October 13, 2005, 02:41:40 AM »
I've been working with the 405 grain lee hollow point and have settled on 36 grains 3031, that little kadahin barrel really loves them with that load at least in my set up and me shooting it its good fro 150 yards, but don't think Iwant to shoot a deer that far just yet , but it sure is fun, only problem I have now is my lee production pot just took a dump, even ater replacing the heating element and thermistate it will not stay hot or melt any lead, just going to have to get me a new one, good thing I still have me a 200 bullets acsted, and 100 rounds loaded up.  bb75
Logged

Offline Cottonwood

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2780
  • Gender: Male
  • "Capturing the moment, to last a lifetime"
Re: Loads for 405 gr. lee cast in 45/70
« Reply #9 on: October 13, 2005, 04:21:38 AM »
Quote from: missed_shot
I just cast about 50 405 gr. hollow base 45/70 bullets from Lee. Wow - that's a hunk of lead.  :eek:   Does anyone have any good loads for this bullet since it isn't gas checked. I plan to use it in my B.C.. Thanks


missed_shot

Is this the Lee .459-405-HB bullet?

What load did you want?  

A smokeless load or a black powder cartridge load?

I suspect since you didn't specify that you want a smokeless load.  I no longer use Unique powder for any 45-70 loadings.  Unique powder is position sensitive.  Accurate Arms 5744 powder however is not, and works I feel much better.

Basicly you can use any loadings found for the 45-70 by looking at these following sites:

Accurate Arms

MD Smiths reloading pages for the 45-70 cartridge

Hodgden 45-70 loadings

CAUTION - Do not accept anyones reloading data that is given on a forum board unless you see that load given in one of the on-line reloading manuals.
Logged
Pages: [1]   Go Up
« previous next »