Author Topic: 357 Ejection Problem. (Read 567 times)

Feldhege · « **on:** January 25, 2006, 05:03:52 PM »

Hello Guys and Gals,
I read on some forum (I think here) about someone who had a problem similar to mine. If I shoot many rounds through my DW 357 (monson) revolver, They begin to stick in the chamber when trying to eject the cartridges. I believe someone said it was most likely due to machining marks still in the cylinder walls. Their solution was to (I THINK) use rouge on a dremel polishing pad and clean them up a little. Not to remove any metal, just to polish out the walls a little. Does this sound right? Just want to make sure before I try it with mine.

Thanks,
Robb

Ocsamschainsaw · « **Reply #1 on:** January 25, 2006, 05:25:09 PM »

Is there any buildup from .38's being shot in the cylinder chambers?
When I got my Dan Wesson, I had that problem until I took a .375 dia. brush through each chamber with some sweet's 7.62.

azmike · « **Reply #2 on:** January 25, 2006, 08:36:30 PM »

I had the same problem in mine. Cleaned the chambers with a .40 cal bronze brush and Sweets, then some Break Free. No more sticking cases. Thought I would try that before polishing, and I'm glad I did.

Feldhege · « **Reply #3 on:** January 26, 2006, 02:16:01 AM »

Guess it could not hurt to give that a try first. I will let you know what happens. Thanks guys.

Robb