Author Topic: Bad batch of primers???? (Read 380 times)

R.W.Dale · « **on:** November 07, 2005, 03:27:20 PM »

OK here is the story. I bought a type 99 Arisaka sporter, I loaded up some ammo using an unopened package of CCI BR primers.

I wiuld get periodic misfires, some would go off on the second strike some would not. So I replaced the 60 year old striker spring but haven't shot it yet. Now today I was sighting in my CZ527 using handload from the same batch of primers. 50% misfires most going off on the second strike. No misfires with Wolf ammo.

Deer season starts saturday so I've got to get this problem solved ASAP

Lloyd Smale · « **Reply #1 on:** November 07, 2005, 10:39:05 PM »

cci primers are harder cupped then most id just switch to a fed primmer it would probably cure your problem

Tycer · « **Reply #2 on:** November 08, 2005, 02:12:32 AM »

i've had similar problems with CCIs

skb2706 · « **Reply #3 on:** November 08, 2005, 03:29:33 AM »

My guess........headspace issues..........either size die incorrectly setup or chamber problems.