« previous next »
Pages: [1]   Go Down

Author Topic: Milk jug load?  (Read 539 times)

0 Members and 1 Guest are viewing this topic.

Offline Ditchdigger

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 1385
  • Gender: Male
Milk jug load?
« on: November 13, 2005, 04:07:45 PM »
Lik2hunt and I were playing around with the 445 supermag today,and may have found a good milk jug rd. I loaded some 180 gr XTP's up with 37 grs. of 296 and was getting 2479 fps avg. It should blow the stuffings out of a jug at that speed. Also loaded some 265 gr. Hornady's with 31.5 grs. of 296 and got 2146 fps. avg. This should realy get a hogs attention. We did'nt get much shooting done because there was a bunch of guys waiting to shoot,and they were much bigger and meaner than us. :roll:  :roll:  Digger
Logged
Rest in Peace Old Friend July 2017

Offline warf73

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 533
Milk jug load?
« Reply #1 on: November 13, 2005, 06:49:21 PM »
It might blow a milk jug apart :) but ya never know.

Warf
Logged
"Life isn't like a box of chocolates...It's more like
a jar of jalapenos.  What you do today, might burn
your ass tomorrow."

Offline MtJerry

  • Trade Count: (4)
  • A Real Regular
  • ****
  • Posts: 539
Re: Milk jug load?
« Reply #2 on: November 13, 2005, 08:27:13 PM »
Quote from: Ditchdigger
I loaded some 180 gr XTP's up with 37 grs. of 296 and was getting 2479 fps avg.


That sounds like a heck of a prarie dog load ....  :wink:
Logged
:D

Offline lik2hunt

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1629
  • Gender: Male
  • I want to acheive excellence, not perfection.
    • Authentic and Genuine
Milk jug load?
« Reply #3 on: November 14, 2005, 01:16:30 AM »
They were just bigger and meaner than me.......and uglier too.....than me I mean.  :)
Prarie Dog load indeed! Can't wait to see the bottom lips laying on the green grass of Hooker Ok when we whip these out and start disentegrating P-Dogs.
The 445 SupMag is proving to be quite the chamber conversion for a Handi. A 265gr. Hornady bullet at so close to 444 Marlin velocities......I'm happy. Hogs BEWARE!
Logged
lik2hunt------>in OK





“The thing that separates the American Christian from every other person on earth is the fact that he would rather die on his feet, than live on his knees!"
George Washington…. also known as the Father of our Country

><> Galatians 2:20 <><

www.dsheriff.org

Offline Datil

  • GBO Supporter
  • Trade Count: (17)
  • Senior Member
  • *****
  • Posts: 1822
  • Gender: Male
445 super mag
« Reply #4 on: November 14, 2005, 03:45:17 AM »
Digger or lik2hunt
 Question, What is the case length of 445 case, and approx how much
 did you have to ream??? Marv.
Logged

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Milk jug load?
« Reply #5 on: November 14, 2005, 04:00:29 AM »
1 addittional question for you guys...besides the case lenght....what is the overall case lenght with those 2 bullets please...I'm doing a comparison with another cartridge...and trying to see which would be best...

Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...

Offline Ditchdigger

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 1385
  • Gender: Male
Milk jug load?
« Reply #6 on: November 14, 2005, 05:20:39 PM »
Marv,the case length is 1.6" and I think you take out .3" more of the chamber.The reamer does not touch the sides of the chamber because the chamber is .006" larger than its supposed to be for the 44 mag. Thats why everyone is getting the bulge in front of the web even with my 44 mag loads. I slugged my barrel and it came out .432 like everone else's. Look's like they would catch this in quality control.   The overall length of my 300 gr. XTP is1.925" Mac .   Digger
Logged
Rest in Peace Old Friend July 2017

Offline Datil

  • GBO Supporter
  • Trade Count: (17)
  • Senior Member
  • *****
  • Posts: 1822
  • Gender: Male
445 super mag
« Reply #7 on: November 14, 2005, 07:55:22 PM »
Thanks Digger for info, All my manuels are little old, couldn't
 find it , thought that and was right. good luck. I am ready to go
 back for some RIBS  :grin:  :grin:  :grin:  :grin:  :grin:  :grin:
 Marv.
Logged
Pages: [1]   Go Up
« previous next »