« previous next »
Pages: [1]   Go Down

Author Topic: Renegade trigger adjustment?  (Read 690 times)

0 Members and 1 Guest are viewing this topic.

Offline Nyghtfall

  • Trade Count: (3)
  • Member
  • *
  • Posts: 40
Renegade trigger adjustment?
« on: November 16, 2005, 05:02:37 AM »
What's the best way to adjust the set trigger on a TC Renegade?
Logged

Offline lonewolf5347

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 219
T/C
« Reply #1 on: November 16, 2005, 10:34:40 AM »
HAMMER IS SET IN THE 1/2 COCK POSITION,THEN SET THE REAR TRIGGER AND THEN TURN THE SCREW IN CLOCKWISE UNTIL YOU HERE TRIGGER MECHANISUM SNAP
THAT IT YOU ARE READY TO GO :D
Logged

Offline roundball

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 375
Re: T/C
« Reply #2 on: November 16, 2005, 01:35:25 PM »
Quote from: lonewolf5347
HAMMER IS SET IN THE 1/2 COCK POSITION,THEN SET THE REAR TRIGGER AND THEN TURN THE SCREW IN CLOCKWISE UNTIL YOU HERE TRIGGER MECHANISUM SNAP
THAT IT YOU ARE READY TO GO :D


And we need to remember the very last step...after the trigger has released, stop turning the screw immediately, and back it out counter clockwise one full turn from that point.
 :wink:
Logged
"Flintlocks.......The Real Deal"
(Claims that 1:48" twists won't shoot PRBs accurately are old wives tales!!)

Offline Nyghtfall

  • Trade Count: (3)
  • Member
  • *
  • Posts: 40
Renegade trigger adjustment?
« Reply #3 on: November 17, 2005, 01:15:47 AM »
Got it.   That works great.  Thanks.
Logged

Offline roundball

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 375
Renegade trigger adjustment?
« Reply #4 on: November 17, 2005, 01:41:26 AM »
Quote from: Nyghtfall
Got it.   That works great.  Thanks.


PS: Things like this are spelled out in TC's owner's manual...along with all their ballistics tables, load data, etc...they'll mail one to you for free, just call TC Customer Service...
Logged
"Flintlocks.......The Real Deal"
(Claims that 1:48" twists won't shoot PRBs accurately are old wives tales!!)

Offline clodbuster

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 551
  • Gender: Male
renegade trig
« Reply #5 on: November 22, 2005, 05:52:13 AM »
You can improve trigger pull smoothness with a trigger job.  My smith also drilled a small hole in the trigger guard just below the set trigger adjustment screw to accomodate a small screwdriver for easier adjustment.  I love my renegade  Buffalo bull. 385gr over 80 gr of Swiss ff shoots lights out for me and the deer it hits.  2" groups at 75 yds with peep sight is common.
Logged
Preserve the Loess Hills!!!

Offline lostid

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 420
Re: renegade trig
« Reply #6 on: November 23, 2005, 03:16:49 PM »
Quote from: clodbuster
You can improve trigger pull smoothness with a trigger job.

With a what??

 Tell us coldbuster please? What did your smith do and/or what is a "trigger job"?? :D  How is smoothness improved,uhmm,,with a "trigger job"?
 What I mean is with Double set double through triggers as supplied with the t'c' gun, what does this do to the stock triggers that changes and makes more smooth?
 Beyond "tuneing" as we refer,,which means to de-bur carefully the moving parts, lube proper,, and adjustment of the lock and/or trigger"set" screws,, what is a "trigger job"? :?

Nyghtfall,keep on reading :-D
Logged
i'm a realist. i've not seen it all, but man ,,I've Been Around the block once or twice

Offline clodbuster

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 551
  • Gender: Male
smooth trigger
« Reply #7 on: November 27, 2005, 02:44:33 PM »
lostid,  Is there a note of sarcasm in that question?  Deburring smoothing tuneing, call it what ever you like but when the gun came back trigger pull was noticeably less gritty.  Is there an underlying question/concern?
Logged
Preserve the Loess Hills!!!
Pages: [1]   Go Up
« previous next »