« previous next »
Pages: [1]   Go Down

Author Topic: O-Ring Size??  (Read 393 times)

0 Members and 2 Guests are viewing this topic.

Offline ghosthunter3074

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
O-Ring Size??
« on: November 18, 2005, 09:19:27 AM »
Anybody know the size of O-ring I need for the front Forend screw so that i can float the barrel on my 204.  Does it need to just fit over the screw itself?   I noticed there are different thicknesses of the o-rings with the same diameter inside hole...    

   IM guessing just enough to pick the barrel up so that its not touching......  



    any thoughts?
Logged

Offline bladerunner

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 506
O-Ring Size??
« Reply #1 on: November 18, 2005, 09:29:17 AM »
WELCOME ghosthunter....you'd get ALOT of usefull info by reading the stickys....9/16"OD x 3/8" ID x 3/32" thick "O" Ring  :D
Logged
Good shot placement + well constructed bullet = DEAD
 
                               Matt B.

Offline ghosthunter3074

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
O-Ring Size??
« Reply #2 on: November 18, 2005, 10:04:46 AM »
Thanks!!!!  Called up Napa..  They have some...  On my way to the sto!!!!
Logged

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
O-Ring Size??
« Reply #3 on: November 18, 2005, 10:19:48 AM »
Ghosthunter3074

Welcome , You will find that some handi's shoot very well with the o-ring , I have a 223 bull brl . that just hates it .

One trick is to support the forarm futher back to the hinge to avoid putting pressure on the barrel .
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline WoodyP

  • Trade Count: (2)
  • Member
  • *
  • Posts: 42
  • Gender: Male
O-Ring Size??
« Reply #4 on: November 19, 2005, 12:14:49 AM »
The O'ring 9/16x3/8x1/8 is a size BN 110, the BN is the material it's made from.
Woody
Logged
Pages: [1]   Go Up
« previous next »