Author Topic: Speer #13 load (Read 402 times)

Idaho_Hick · « **on:** December 13, 2005, 10:39:57 AM »

I was hoping someone could tell me if Speer has Varget listed in their .308 loads in #13. I have #12 and no Varget loads. My Sierra manual has Varget, and I have information from Hogdon, But I was hoping someone with a new speer manual could tell me what is reccomended with SPEER bullets. Thanks for your help.

PaulS · « **Reply #1 on:** December 13, 2005, 11:38:04 AM »

The #13 Speer manual lists loads for Varget in bullet weights from 110 to 180. I can't type well enough to put all that information in a post.

Idaho_Hick · « **Reply #2 on:** December 14, 2005, 04:37:50 AM »

Thanks paul, if you could tell me what they list for their 165 grain bullets I will owe you big.

steve4102 · « **Reply #3 on:** December 14, 2005, 12:55:23 PM »

Here is the 165gr. If you need any others let me know. I hope you can read it.

PaulS · « **Reply #4 on:** December 14, 2005, 07:22:12 PM »

42 to 46 grains of Varget with a Speer 165 grain at an overall length of 2.8 inches. the specs use a CCI 200 primer and the load has an advertised maximum velocity of 2751fps from a 22 inch barrel.

ButlerFord45 · « **Reply #5 on:** December 15, 2005, 01:42:18 AM »

Quote from: steve4102

Here is the 165gr. If you need any others let me know. I hope you can read it.

Steve, there is no doubt in my mind that the Hick appreciates your efforts, but the scan need's to be sent via Private Message, posting it in the open forum get's real close to copyright infriengment
Thanks

Idaho_Hick · « **Reply #6 on:** December 15, 2005, 04:24:24 AM »

Thanks all. Looks like Speer and Hogdon are in pretty close agreement this time. I appreciate all your replies.