Author Topic: Single Six Thoughts... (Read 1678 times)

DELETED · « **on:** November 13, 2005, 05:20:38 AM »

DELETED

Spencer · « **Reply #1 on:** November 13, 2005, 03:16:40 PM »

Get the bisley, it is obvious you really like it. life is short and you might just as well get what you really want the first time. I am sure if it does not come in the 4 5/8 inch barrel, you could probably get it modified somewhere. I am not too familiar with rugers about that, but I know at S&W, you can send them back to the factory and get a different length barrel put on.

pathfinder · « **Reply #2 on:** November 20, 2005, 06:05:44 PM »

It took me a little while to be able to shoot the regular grip but now I prefer it. I own 4-5/8", 5.5" & 6.5" and love em all. Shorter is handy but I think the 5.5 is my favorite. I do shoot the longer barrels a little better.

Duane · « **Reply #3 on:** November 21, 2005, 12:52:25 AM »

Ive had one with a 5.5 barrel had a local gunsmith shorten it to 4 5/8 didnt see much accuracy lost plus makes it much handier to carry when woods walking and fishing I live in Louisiana many alligators in the marsh either way you wont be dissapointed im a big fan of single actions plus they eat anything shorts longs or long rifle there just tooo versatile

Jerry Lester · « **Reply #4 on:** November 21, 2005, 07:33:12 AM »

Yes, if you don't have a Single Six already, you should be ashamed!

Like Pathfinder I prefer the 5.5" length myself. I'd also suggest getting a stainless version. They balance way better than the blued models, and are a lot easier to take care of as far as preventing rust and such.

Now, you go on and get that revolver, and I positively garrantee you'll be tickled that you did!

BlkHawk73 · « **Reply #5 on:** November 21, 2005, 12:07:25 PM »

Quote from: Jerry Lester

I'd also suggest getting a stainless version. They balance way better than the blued models, quote]

:? Ok, you gotta explain this one. I've got models of the same gun in both blued steel and stainless and never noticed ANY balance differences. :?

Jerry Lester · « **Reply #6 on:** November 21, 2005, 01:00:47 PM »

Quote from: BlkHawk73

Quote from: Jerry Lester
I'd also suggest getting a stainless version. They balance way better than the blued models, quote]

:? Ok, you gotta explain this one. I've got models of the same gun in both blued steel and stainless and never noticed ANY balance differences. :?

The blued versions have aluminum grip frames, which cause them to feel just a little barrel heavy. The stainless versions have stainless steel grip frames, which, to me anyway, makes the gun feel much more balanced, plus adds just a little more weight to the over all feel of the gun.

I'm not saying it's a huge difference, but it definately can be felt, and to me, the stainless versions just feel more like a revolver should feel. The little extra weight also aids in holding more steady when shooting off hand.

Questor · « **Reply #7 on:** November 22, 2005, 05:50:37 PM »

It's too small for my hands. Does it fit yours?

alchemist · « **Reply #8 on:** January 03, 2006, 02:47:57 PM »

Not sure why you'd go for a bisley unless you are target shooting or going to use it primarily to hunt, even still a 6.5 inch single six is fine. The grip is good for hard kicking magnums which is a moot point here. Plus the bisely is a trifle heavier. If you're trapping in the snow or rain, whichis probably the case, the stainless will suit you better. I have a 6.5 inch, a 4.75 inch and a 5.5 inch and I find for general, all around use, the 5.5 in a cross draw holster is the best. I use my 4.75 for woods loafing and prtection against rabid animals at clsoe range and the 6.5 only for hunting, but that 5.5 in a cross draw will serve both functions.

DakotaElkSlayer · « **Reply #9 on:** January 03, 2006, 03:53:19 PM »

Just took out my new 5.5" Stainless Single Six to the range for the first time today. Wow...she sure can shoot! I would highly recommend the adj. sight models since mine shot really tight groups, but to the left of center.

Jim

Bullseye · « **Reply #10 on:** January 06, 2006, 06:58:17 AM »

I have a Single Six with both cylinders and a Bisley Single Six. I am working on selling them both. I have had the Standard one for about 15 years and never did grow to like the grip. I have had the Bisley for about 1 1/2 years and while the grip is better I still have not grown fond of it.

I was at the range last week shooting my big bore Smith's. I then picked up the Bisley and it just felt strange in my hand and the trigger reach is awful short for me. I said to myself, I am going to buy a Smith 617 and sell the Rugers. Plan is half done. I picked up the 617 last night and think I have a couple of people interested in the Rugers.

corbanzo · « **Reply #11 on:** January 09, 2006, 08:47:23 AM »

For hunting, I have the six, regular, both cylinders, with a 9.5" barrel. You're eating grouse at 75 yards with that thing. The grip seems small, but just takes some getting used to. I don't mind it at all, one of my favorites. Just a hint, don't shoot anything smaller than a rabbit with the WMR if you are planning on eating it, even though its a short barrel... it still takes chunks out