« previous next »
Pages: [1]   Go Down

Author Topic: which dies?  (Read 596 times)

0 Members and 1 Guest are viewing this topic.

Offline huntnut

  • Trade Count: (4)
  • Contributor
  • ***
  • Posts: 283
which dies?
« on: February 06, 2006, 12:00:07 PM »
I have reloaded for sevral years and only used rcbs dies I was wondering  if there are any better dies for reloading the encore with? I have heard that lee dies are one of the best and accurate even thou there so cheap. I well reload for a 270win but have to get new dies sold my old ones. I have reloaded for this cartridge before and was getting .5" groups out of my savage110 with both 130gr w/4831sc and 90gr w/varget.
Logged
AIM SMALL MISS SMALL 1 SHOT 1 KILL

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
which dies?
« Reply #1 on: February 06, 2006, 12:19:11 PM »
I would hardly say the Lee dies are better than others. I have several sets and can't really complain about them but I prefere the Hornady New Dimention dies myself. I like the floating bullet bushing they use to keep the bullet straight while seating.   KN
Logged

Offline Racepres

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 266
which dies?
« Reply #2 on: February 06, 2006, 06:06:19 PM »
Since the Lee's are indeed fairly inexpensive, go ahead and get the ones w/ the factory crimp die w/ em.. they work. I  also like the hornady seater [especially w/ the micro adjustment] You can get them seperately and also get the caliber specific sliding sleeve and seating stems... so 1 die serves all for me...Just like the the lyman stepped expander for cast bullets.  Good luck in your decision making process....   MV
Logged

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
which dies?
« Reply #3 on: February 07, 2006, 03:03:27 AM »
I've owned and used about every brand in existance over the years, I guess.  Never really found a favorite though.  I share the foundness of Hornaday's seating die.  Most recently I've been getting very good results with Lee's collet sizing dies.  GOOD SHOOTIN', Walt  :grin:
Logged

Offline flyfisher

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 187
  • Gender: Male
which dies?
« Reply #4 on: February 07, 2006, 08:18:34 AM »
I've long been an RCBS fan...good quality die sets and a good warranty.  When it was time to get a die set for the .375 Win., I found a Redding set cheaper than the RCBS, so decided to try it.  I've been very pleased with the set, and will probably buy another Redding some day.
Logged
How'd you like a peek at my 14-incher? (Contender, that is)

Online Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26942
  • Gender: Male
which dies?
« Reply #5 on: February 07, 2006, 10:55:06 AM »
I used to use only RCBS but I've come to prefer the Hornady over all others and I love the Micro-Just Seater attachment. All of my bullet seaters have it now.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline jcunclejoe

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 160
which dies?
« Reply #6 on: February 07, 2006, 12:48:26 PM »
I have never had a problem with RCBS dies they always make good ammo, I like Hornady dies too, but if I can get them I will buy Bonanza every time. I have had a very bad die set from Redding and was not pleased with their customer service concerning a powder measure. Havn't thought much about Lee dies even though I have a few sets.
Just my view of the die situation.
Joe
Logged

Offline long40shot

  • Trade Count: (0)
  • Posts: 2
which dies?
« Reply #7 on: February 07, 2006, 03:01:04 PM »
RCBS is very good, but one word: Redding.
Logged

Offline MnMike

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 493
which dies?
« Reply #8 on: February 08, 2006, 04:52:17 PM »
I have found that for convenience (no lubing, minimum trimming) and accuracy that the Lee collet neck size die makes my Contender happy.

JMHO

mike
Logged
Mike Ellestad

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
which dies?
« Reply #9 on: February 09, 2006, 03:09:31 AM »
Anyone that is reloading a .22Hornet REALLY needs to try a Lee collet neck size die.  Honest!

Hey Mike, Life is gooood!...huh, brother.  :grinGOOD SHOOTIN', Walt
Logged
Pages: [1]   Go Up
« previous next »