« previous next »
Pages: [1]   Go Down

Author Topic: 45/70 ammo  (Read 820 times)

0 Members and 2 Guests are viewing this topic.

Offline c1skout

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 256
45/70 ammo
« on: January 27, 2006, 07:38:23 PM »
Just found this forum, great stuff. I was wondering if anyone has had any trouble shooting remington 405gr from their 45/70? I had around 6 shells from a box that did not go bang. They didn't feel light, had good looking primer strikes, just no bang. I haven't had any trouble with any other ammo from this gun.
Logged

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
45/70 ammo
« Reply #1 on: January 27, 2006, 08:01:29 PM »
Welcome to Graybeards.
Humm...all I can say is-perhaps a bad batch?
I personally don't own a 45-70, well not yet :grin: , so I can't speak form experiance. But I don't recall anyone having problems with the Remys.
-Aaron
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
45/70 ammo
« Reply #2 on: January 27, 2006, 08:15:54 PM »
Welcome aboard!! I suspect remington has produced a few bad primers, I've had some rem 9½ primers fail on my handloads which just happen to be in my 45-70 loads. Never had any problems with the rem .405 factory loads, tho.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline c1skout

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 256
45/70 ammo
« Reply #3 on: January 28, 2006, 01:32:14 AM »
Thanks guys, I was thinking bad batch too.  I was going to send remington an e-mail but couldn't find where to send one.
Logged

Offline tanoose

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 839
  • Gender: Male
45/70 ammo
« Reply #4 on: January 28, 2006, 03:14:08 AM »
They have a great website and you can e-mail them about anything just give them a couple of days to answer its www.remington.com and welcome abord  Later Tanoose
Logged

Offline mt3030

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 939
  • Gender: Male
45/70 ammo
« Reply #5 on: January 28, 2006, 04:42:23 AM »
If I have to buy or trade for factory 45-70 ammo, Remington is my first choise. Have never found a problem like yours,...yet! Of course anything is possible. A lot can depend on how old and how the ammo was handled and stored. Moisture and oil contaminates can effect ammo over a period of time. The advice above is good, contact Remington. Good luck.
Wally
Logged
Great Falls, Montana
_________________
NRA Life Member
Rocky Mountain Elk Foundation
Ducks Unlimited

Deceased 6/2/2007

Offline stuffit

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 303
Remington Ammo
« Reply #6 on: January 28, 2006, 04:44:25 AM »
How long had it been since you fired the rifle with "other ammo" when you encountered the misfires?  What kind of indent did the firing pin make on those rounds?.  If you snapped them again, did any of them fire (this would be an indication of whether the primers were "dead" or just not struck hard enough.)?   I've seen guns that had been put up for a while that had accumulated "gunk" inside the action and did the same thing you describe, but after some good cleaning and oiling, never missed another lick.   As has been said, a "bad batch" is within the relms of possibilities but I've not seen this phenomina in any brand name manufacturers bullets such as Remington.   Trying some of the rounds in a different weapon might also be of interest.  
 8)
stuffit
Logged
Everybody changes their minds sometimes but a fool and a mule.

Deceased

Offline c1skout

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 256
45/70 ammo
« Reply #7 on: January 28, 2006, 03:54:19 PM »
I was having this problem (the last time) during a range session where I also shot federal and 300gr remington without a problem. The first time one of these didn't go off I was shooting on a windy 20deg. day so I figured it was just the cold gumming up my firing pin. After giving the gun a good bath with gum cutter the next time I tried these shells it was about 60deg. and sunny so the cold wasn't the problem. I did double, mabye even triple strikes on the ones that didn't go bang. I saved the last 2 non-firing shells from that box with the intension of pulling the bullets to see what is in them, just haven't got around to it yet. Primer strikes all look pretty good to me.
Logged

Offline stuffit

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 303
failure to fire
« Reply #8 on: January 28, 2006, 04:17:56 PM »
You just gotta pull em and see what's inside.  For one thing, do they have powder?  Did the primers fire and the powder fail to ignite or were the primers just dead.  The thought comes to mind of possible inactivation of the primers by some solvlent or penetrant such as WD 40 though I think the effect of the latter on primers has been overstated some.  

Pull 'em.  Now you've got me hooked.   :lol:
stuffit
Logged
Everybody changes their minds sometimes but a fool and a mule.

Deceased

Offline Sourdough

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 8150
  • Gender: Male
45/70 ammo
« Reply #9 on: January 28, 2006, 05:16:29 PM »
Had a problem with factory Remington .35 Whelen cartridges not going off with my Handi.  They shot fine through my Mauser.  Just that one box.
Logged
Where is old Joe when we really need him?  Alaska Independence    Calling Illegal Immigrants "Undocumented Aliens" is like calling Drug Dealers "Unlicensed Pharmacists"
What Is A Veteran?
A 'Veteran' -- whether active duty, discharged, retired, or reserve -- is someone who, at one point in his life, wrote a blank check made payable to 'The United States of America,' for an amount of 'up to, and including his life.' That is honor, and there are way too many people in this country today who no longer understand that fact.

Offline poncaguy

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2751
  • Gender: Male
45/70 ammo
« Reply #10 on: January 29, 2006, 05:54:03 AM »
No problems in my 45-70 Handi or my 16" Contender pistol with any 45-70 ammo..............
Logged

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
45/70 ammo
« Reply #11 on: January 29, 2006, 07:47:27 AM »
I haven't had much problem with Remington ammo of late..but I have had some primers that failed to go off..I suspect it was due to my mishandling them..but..as far as factory ammo..I always call them and let them know I had a problem and every time they ask for the ammo back to look at.I've always gotten another box or 2 from them for my trouble of sending them back to them.The last batch I did this with was with some Weatherby factory ammo..and it was replaced from the store I bought it and given to the factory rep....They do like to know if there is a problem and it has always paid off for me to call..

Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...

Offline c1skout

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 256
45/70 ammo
« Reply #12 on: January 29, 2006, 03:18:59 PM »
Does anyone have an e-mail address for remington ammo? All I could find on the website was a long distance phone number. I guess I should try to sive them a shout before I pull these bullets in case they want to look at them.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
45/70 ammo
« Reply #13 on: January 29, 2006, 03:26:27 PM »
They have an online email system under Support, then Help Center and hit the "ask a question" tab. The direct link is too big and makes the page too hard to read, won't work as a hot link.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline c1skout

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 256
45/70 ammo
« Reply #14 on: January 29, 2006, 04:06:24 PM »
Thanks quickdtoo, I never would have found that... their website gives me stress! I got my question sent out now I'll wait to see what they want me to do.
Logged

Offline wrongpaw

  • Trade Count: (0)
  • Member
  • *
  • Posts: 35
  • Gender: Male
45/70 ammo
« Reply #15 on: January 30, 2006, 07:25:14 AM »
Did you follow thru with the trigger pull ?
Because of the transfer bar, these guns
are pretty particular as to holding the
trigger back until completion of the
hammer fall.

regards,
wrongpaw
Logged
Regards,
Wrongpaw
Pages: [1]   Go Up
« previous next »