« previous next »
Pages: [1]   Go Down

Author Topic: 917VS Drilled & Tapped?  (Read 631 times)

0 Members and 1 Guest are viewing this topic.

Offline Canadian81

  • Trade Count: (1)
  • Member
  • *
  • Posts: 34
917VS Drilled & Tapped?
« on: January 22, 2006, 03:57:34 PM »
I have a 917VS and I've been reading that is suppose to be drilled and tapped to mount a scope base on, mine is not it only has the grooves to mount the rings on. Is this normal? Has anyone else had this on thier gun?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
917VS Drilled & Tapped?
« Reply #1 on: January 22, 2006, 04:17:56 PM »
It's not a 917VS then, it's a 17VS, the pre 2004 model, unless Marlin skipped a step!!! :eek:
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Canadian81

  • Trade Count: (1)
  • Member
  • *
  • Posts: 34
Difference?
« Reply #2 on: January 23, 2006, 05:06:10 AM »
What is the difference between the 17VS and the 917VS?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
917VS Drilled & Tapped?
« Reply #3 on: January 23, 2006, 05:57:08 AM »
Different trigger and safety, it's not drilled and tapped and doesn't come with bases, was made in 2003.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Canadian81

  • Trade Count: (1)
  • Member
  • *
  • Posts: 34
Accuracy
« Reply #4 on: January 23, 2006, 06:17:34 AM »
Is there any difference in accuracy? Is the trigger better or worse than the new ones?
Logged

Offline mjbgalt

  • Trade Count: (26)
  • Senior Member
  • *****
  • Posts: 2367
  • Gender: Male
917VS Drilled & Tapped?
« Reply #5 on: January 23, 2006, 03:13:42 PM »
the triggers were updated in the 917vs. The thin metal one you have is just fine however. The new T-900 system has a wide plastic trigger but i am not sure if it's a better one or not.

-Matt
Logged
I have it on good authority that the telepromter is writing a stern letter.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
917VS Drilled & Tapped?
« Reply #6 on: January 23, 2006, 03:25:58 PM »
As Matt said, the trigger isn't better, just different, but the safety is much better. 17VS shooters are just as happy as the 917VS shooters. I've seen some say that the finish of the 17VS stainless is nicer, but not having seen em side by side, I don't know. Here's a thread from RFC on the 17V(S) trigger modification if you can't get a Rifle Basix trigger for it, dunno what your options are in Canada.

http://www.rimfirecentral.com/forums/showthread.php?t=47392
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
917VS Drilled & Tapped?
« Reply #7 on: February 03, 2006, 03:56:01 PM »
Don't worry about it not being d&T'ed, They drill'em crooked anyway  :?
Ask me how i know  :shock:
Ge yourself a BKL Mount, They are great.
http://bkltech.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=BKL&Product_Code=261&Category_Code=200
Oh' Ya' the T-900 trigger needs work, takes 2 Men and a Small boy to pull the thing, very Creepy and Gritty  :x
Logged
Failure is not an option
Placer County, Calif.

Offline mjbgalt

  • Trade Count: (26)
  • Senior Member
  • *****
  • Posts: 2367
  • Gender: Male
917VS Drilled & Tapped?
« Reply #8 on: February 03, 2006, 07:25:35 PM »
He isn't kidding about the drilling being crooked. Mine looked ok until I put the mount on and could see it in relation to the barrel.

Looked like a group of "special" kids had it in their school as a project.

I ended up using the dovetails and it shot great anyway.

-Matt
Logged
I have it on good authority that the telepromter is writing a stern letter.
Pages: [1]   Go Up
« previous next »