« previous next »
Pages: [1]   Go Down

Author Topic: First Shotshell Press-MEC or RCBS?  (Read 1703 times)

0 Members and 1 Guest are viewing this topic.

Offline 4296

  • Trade Count: (0)
  • Member
  • *
  • Posts: 40
First Shotshell Press-MEC or RCBS?
« on: September 19, 2005, 04:23:19 PM »
I am looking to buy a first press for low volume reloading of 20 gauge trap loads. The MEC 600 Jr. and the RCBS Mini Grand seem to fit the bill. I would like to hear others experiences with these presses. Is one superior to the other even though they cost the same?
Logged

Offline Val

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 846
RCBS vs: MEC
« Reply #1 on: September 20, 2005, 04:17:18 AM »
I use RCBS for rifle and handgun reloading and MEC for shotgun reloading. Both make excellent equipment. MEC kind of rules the shotgun reloading arena and from the standpoint of availability of parts and service, I would recommend you go with MEC.
Logged
Hunting and fishing are not matters of life or death. They are much more important than that.

Offline .45 COLT

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 319
First Shotshell Press-MEC or RCBS?
« Reply #2 on: September 20, 2005, 06:45:11 AM »
I've never used the MiniGrand, so I can't compare the two, but I like the MEC presses I have used. I must, I keep buying more of them. :grin:

DC
Logged
On the 19th of April, 1775, a tyrannical government sent an army to disarm its citizens. They ran into a touch of trouble.

Offline Ka6otm

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 241
First Shotshell Press-MEC or RCBS?
« Reply #3 on: September 20, 2005, 07:19:45 AM »
The Mini Grand may be good, but I know that the MECs are good.  I have 4 of them and the oldest-a MEC 600Jr. in 20 Ga. has been going strong since 1970 or so.

Ka6otm
Logged

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
First Shotshell Press-MEC or RCBS?
« Reply #4 on: September 24, 2005, 03:38:28 PM »
I would recomand the Mec Size Master. It will resize the case heads and alow you to use any cases that you might be able to pick-up at the range. If you go with the 600 Jr. you may find that alot of the cases that you pick-up may not chamber in your gun.
Logged

Offline Ka6otm

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 241
First Shotshell Press-MEC or RCBS?
« Reply #5 on: September 25, 2005, 04:28:43 AM »
Catfish,

You're wrong about resizing in the 600 Jrs.  They have a resizing ring in lieu of a collet, but they do resize the brass.  Check the MEC website for details.

Ka6otm
Logged

Offline astrix

  • Trade Count: (15)
  • Avid Poster
  • **
  • Posts: 173
First Shotshell Press-MEC or RCBS?
« Reply #6 on: February 06, 2006, 03:57:38 AM »
I use a MEC 600 Jr. Mark 5 and it works wonderfully.I
have never had a picked up hull not chamber normally
in any of my 4 shotguns after loading on this press.
Gary
Logged

Offline Flyrodder

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
First Shotshell Press-MEC or RCBS?
« Reply #7 on: February 06, 2006, 03:34:34 PM »
Can't go wrong with MEC.
Logged

Offline strut64

  • Trade Count: (0)
  • Member
  • *
  • Posts: 61
shotshell press
« Reply #8 on: March 05, 2006, 01:09:37 PM »
MEC - NUFF SAID
Logged
Pages: [1]   Go Up
« previous next »