Author Topic: RELOADING 348 (Read 675 times)

dennis b · « **on:** April 01, 2006, 08:32:48 AM »

I just bought a model 71 Winchester was hopeing someone can suggest a handload to start with.thank you

Al · « **Reply #1 on:** April 02, 2006, 12:55:21 AM »

I've had good luck with the 200gr Hornady and H4831 from the Hodgon data they have on their site.

bcboy · « **Reply #2 on:** April 03, 2006, 08:27:03 PM »

After experimenting I find R19 to be the best.

gsp71 · « **Reply #3 on:** April 04, 2006, 05:46:01 PM »

imr 4350 ....Mostly because I have a lot on hand but I've had good results using 200 gr. Hornady and 250 gr Barnes.

Al · « **Reply #4 on:** April 29, 2006, 11:51:07 AM »

I just ran some 200gr Hornadys over the chronograph, not a screamer load, but very accurate and comfortable to shoot.

65gr of Reloader 19, lit with a 210 Federal primer, for 2423fps. Std. deviation of 13fps, for 10 shots.

This was from a 24" Browning 71.

I'll try some factory loads and maybe a couple of others next time out.