Author Topic: Would .45 Colt to .454 be safe? (Read 480 times)

NewYorkRifleMan · « **on:** March 23, 2006, 04:28:58 PM »

I really want a .454 but NEF doesn't make it. I don't know why don't don't. I've asked soooooooo many times. On Target Tec says that they can do it and they think the frame can handle it. They'll take the .45 colt and make it .454.

What do you think? Its 100.00 to do it. I don't want my gun to explode !

knight0334 · « **Reply #1 on:** March 23, 2006, 04:43:34 PM »

The receivers will handle it since they handle 64K psi .270win cartridges. Thrust should be fine too considering the recoil of the heavy 450marlin, 45-70 and 500S&W are fired in it..

The barrel though might be a problem.. I'm not sure to the grade of steel and pressure ratings of it for the .45LC/410 samples.

You would have to be damned sure to remove the choke before firing too.. ..and that you had a SB2 receiver.

I personally wouldn't try it until I had all the math figures for the cartridge, receiver and barrel to compare against each other. ....then itd first 20-40 shots would be in a gun vice with me pulling on a string while hiding behind a tree to fire it.

quickdtoo · « **Reply #2 on:** March 23, 2006, 04:49:53 PM »

For one thing, the only barrel that NEF makes in 45 colt is also a .410 chamber, so it certainly wouldn't be ideal with the long throat and excessive bullet jump. The other issue is the SB1 frame on the 45C/.410, you would need an SB2 frame to shoot the .454 Casull with it's pressure being at 50kcup, right up there with the .500S&W.

Personally, I see no benefit in the .454 Casull in a rifle, the .500 S&W, .45-70 and .450 Marlin are already production firearms and available as accessory barrels. Another choice would be to have a 44mag barrel reamed to 445 Supermag if you want to stick with the little bullets.

Tim

http://www.leverguns.com/articles/saami_pressures.htm

quickdtoo · « **Reply #3 on:** March 23, 2006, 05:18:35 PM »

We forgot to mention that the 45C/.410 barrel only has a front bead and isn't drilled and tapped for sights, another added cost to fix. The other calibers I mentioned all come with sights and are D&Td cept the .450M.

Tim

fuzzy · « **Reply #4 on:** March 25, 2006, 03:10:51 AM »

You mite want to read the thread that Hutch Handiman wrote. I brought it back up top didnt know how to post a link to it :oops: one word of caution id only shoot it on a sb2 reciver. Rich

mt3030 · « **Reply #5 on:** March 25, 2006, 06:55:27 AM »

Quote/...all come with sights and are D&Td cept the .450M. /Unquote

Funny! My 450 Marlin Ultra Hunter was drilled and tapped just as all other Handi rifle barrels.

Wally

quickdtoo · « **Reply #6 on:** March 25, 2006, 09:24:04 AM »

Quote from: mt3030

Quote/...all come with sghts and are D&Td cept the .450M. /Unquote

Funny! My 450 Marlin Ultra Hunter was drilled and tapped just as all other Handi rifle barrels.

Wally

Does it have sights too? The current accessory barrel doesn't have sights, comes with a scope rail!

Tim

http://www.hr1871.com/barrelAcc/index.htm